Wireless actuator impulse switch with integr. relay function

Wireless impulse switch with integr. relay function 1 NO contact potential free 16A/250V AC, 230V incandescent lamps and halogen lamps 2000W, 230V LED lamps up to 400W. Only 0.8 watt standby loss. For installation. 49x51mm, 23mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. The convenient tap technology permits the teach-in of wireless universal pushbuttons, wireless direction push­buttons and wireless central control pushbuttons. It is possible to select between the functions ES, ESV with various off-delay times, permanent light by pushbutton and switch-off early warning or ER with or without safety and power saving function. You can switch on bidirectional wireless and/or a repeater function. Distance betw. control terminals and contact: 6mm. Supply voltage and control voltage locally 12-36V DC. If supply voltage fails, the device is ­switched off in defined mode. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally by a conventional control switch if fitted previously. On request the independent IP address permits remote access over the internet as the device is an IoT product of the latest generation. Bluetooth is also incorporated. When operated in offline mode, Wi-Fi, Bluetooth and EnOcean can be completely disabled. Future firmware updates can be loaded per Wi-Fi via smartphone or the internet. All settings can be backed up and then loaded to other actuators of the same type as required. This actuator is Apple-certified and can therefore be taught-in to Apple HomeKit. It can also be taught-in to actuators in Google Assistant, Amazon Alexa and other systems after a firmware update. The Eltako app makes setting, triggering and controlling Smart Home functions by smartphone much faster and simpler.