Viko by Panasonic Accessoires (interrupteurs et prises)
Tight schedules and mixed interiors push installers to standardize frames, plates, and fixings so faceplates line up and labeling stays consistent. Viko by Panasonic’s accessory families share one geometry, so you can mix functions across ranges without fighting box spacing or screw patterns.
viko by panasonic accessories for switches and sockets portfolio overview
One platform covers single to five-gang frames, support plates, cover options, adapter rings, gaskets, shutters, and labeling windows. Series sit on the 55 mm module standard with 60 mm box screw spacing, so older back boxes remain usable. Stock viko by panasonic accessories for switches and sockets by gang count, color, and IP class to keep site packs predictable.
viko by panasonic frame accessories series and finishes
Matte white, gloss white, anthracite, metallic, and wood-effect trims are common, with antibacterial and UV-stable variants for healthcare and sun-exposed walls. One-through-five-gang frames keep a constant outer line so grids align above skirtings and tile lines. When selecting viko by panasonic frame accessories, map finish codes to room types early—lobbies, patient rooms, BOH—so replenishment never mixes hues.
viko by panasonic mounting plates supports and adapters
Rigid supports accept switches, sockets, data keystones, and blind plates; multi-gang bars hold 71/71/71 mm center distances for triplets. Drywall adapters clamp cleanly in 68 mm cutouts; masonry kits pick up 60 mm screws in flush boxes. Use viko by panasonic mounting plates where you need rock-solid alignment for mixed power/data on the same axis.
viko by panasonic decorative frames design options for interiors
Slim bezels suit minimalist halls; wider radiused frames hide plaster tolerances on rough walls. Corner radii and edge profiles match skirting trunking for a continuous look. Hospitality bundles usually lock one trim and two alternates; document viko by panasonic decorative frames against room schedules so FF&E stays consistent floor to floor.
viko by panasonic cover plates function-driven choices
Blanking plates, shuttered safety covers, inscription windows, and IP44 gasketed variants handle wet rooms and housekeeping splash. Low-profile USB/charge lids clear curtains and wardrobes. Keep viko by panasonic cover plates paired with the correct support depth so buttons sit flush and indicators line up.
viko by panasonic installation accessories spacing and alignment
Spacers (2–10 mm), leveling shims, separation barriers (SELV/mains), screw sets, and earth tails ship in uniform sachets. Alignment jigs set true horizontal before tiling, and repair rings rescue oversize cutouts. Crews standardize on viko by panasonic installation accessories to repeat the same torque, strip length, and labeling outcome on every floor.
viko by panasonic electrical components integration and upgrades
Adapter cassettes take RJ45 keystones, TV/SAT, HDMI passthroughs, and indicator LEDs; dimmer/USB fronts snap onto the same supports. Retrofits swap only the visible parts, leaving boxes and supports untouched. For mixed estates, log viko by panasonic electrical components by module function and finish so maintenance can swap without re-aiming frames.
Technical specifications and standards that matter
Materials: PC/ABS or PC, UV-stabilized, halogen-free options. Impact: typical IK05–IK07 depending on frame. Heat: glow-wire 650 °C (fronts) and up to 850 °C on supports per IEC 60695-2-11. Ingress: IP20 standard rooms; IP44 with gasket sets for wash areas (confirm orientation). Dimensions: 55 mm system, 60 mm screw spacing; 68 mm drywall cutout; 71 mm module pitch in multi-gang bars. Electrical interface: terminals per device family; barriers for SELV separation. Compliance touchpoints: EN 60669-1 (switch mechanisms), EN 60670-1 (boxes/enclosures), IEC 60529 (IP), marking per ISO 7000 symbols.
Applications and compatibility
Hotels, offices, clinics, education, and residential towers. Use antibacterial trims for healthcare, gasketed covers in janitorial closets and bathrooms, and metal supports where vandal resistance matters. In data walls, specify keystone adapters with maintained bend radius; in guest rooms, pick low-profile frames to avoid curtain snag.
Selection criteria for B2B buyers
- Fix platform geometry first (55 mm system, gang plan), then pick finishes per area.
- Choose support material (metal/plastic) by abuse level; lock IP class where cleaning or splash occurs.
- Define labeling—engraved, window, or printed—and reserve space on cover plates.
- Standardize screws, torque (0.4–0.6 Nm typical for device terminals), and strip length (8–10 mm) in the method statement.
- Pre-bundle room kits: support, frame, cover, barrier, screws, and earth tail in one EAN. This avoids ad-hoc mixing during night shifts.
Advantages of working with Bankoflamps
Your schedule drives procurement. We issue job-specific pricing, near-hour quotes by EAN/MPN, and show live EU stock before rooms are released. The portal lists lead times, shipment tracking, and downloadable price lists with validity windows you can plan against. Trusted clients can use post-payment up to 30 days. We consolidate partials so frames, supports, covers, adapters, and barriers arrive room-bundled by level. Your account manager cross-checks finish codes, gang plans, IP needs, SELV barriers, and torque notes against drawings—keeping deliveries site-ready across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.