Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
UD/S4.315.2.1 LED-Dim actuator 4x315W image 1
MD99 image 2
MD01 image 3
UD/S4.315.2.1 LED-Dim actuator 4x315W image 4
UD/S4.315.2.1 LED-Dim actuator 4x315W image 5
UD/S4.315.2.1 LED-Dim actuator 4x315W thumbnail 1
MD99 thumbnail 2
MD01 thumbnail 3
UD/S4.315.2.1 LED-Dim actuator 4x315W thumbnail 4
UD/S4.315.2.1 LED-Dim actuator 4x315W thumbnail 5

UD/S4.315.2.11 LED dimmer 4 x 315 W/VA

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
783,928 € par pièce
Ce prix est valable jusqu’au 31.12.30
EAN: 4011395251966
MPN: 2CKA006197A0057
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): Sur demande

Technical Information

État de l’article Nouveau
Nom du fabricant UD/S4.315.2.1 LED-Dim actuator 4x315W
Marque ABB
Catégories Sensors
Code du système harmonisé 8538 9091 00
Méthode de montage DRA (adaptateur pour rail DIN)
Modèle Actionneur de gradation
Nombre de sorties 4
Fréquence 50-60 Hz
Système de bus KNX Yes
Système de bus radio fréquent Yes
Système de bus Powernet Yes
Avec connexion de bus Yes
Type de charge Universel et LED Retrofit
Tension 230 V
Largeur en nombre d'espacements modulaires 120
Autres systèmes de bus Aucun
Système de bus LON Yes
Entrée de la sous-station Yes
Service parallèle possible Yes
Opération locale/opération manuelle Yes
Puissance de sortie 315 W
Degré de protection (IP) IP20
Avec indication LED Yes
Puissance d'amplification adaptée Yes
Système de bus KNX radio Yes
Fréquence radio bidirectionnelle Yes
Module de bus détachable Yes
Profondeur minimale de la boîte d'encastrement 64.5 mm
Puissance de commutation max. 0 W

Détails d’emballage

Niveau d’emballage 1 4011395251966

Téléchargements

Description

Multichannel universal dimming actuator optimised for dimming retrofit LED lamps (LEDi). Also suitable for dimming incandescent lamps, low-voltage halogen lights with conventional or electronic transformers, 230 V halogen lamps and dimmable energy-saving halogen lamps. Automatic load detection (can be deactivated). Separate N-connection per channel. Parallel connection of the outputs possible to increase the output power. Outputs can be connected in parallel in groups. Minimum load: 2 W. Manual operation on device also possible without bus voltage or in an unprogrammed status. Programming of the device also possible without applied 230V supply voltage. Extensive test and diagnosis functions for the i-Bus tool. Fast parameter setting in ETS using copyable channel templates. With integrated bus coupler. Nominal power at 230 V~ mains voltage: 230 V~ incandescent and halogen lamps: 4 x 315 W/VA to 2 x 500 W/VA in trailing edge control, 4 x 120 W/VA to 2 x 200 W/VA in leading edge control. Dimmable 230 V~ LEDi: 4 x 315 W/VA to 2 x 500 W/VA in trailing edge control, 4 x 120 W/VA to 2 x 200 W/VA in leading edge control. Inductive L-transformers with LED/low-voltage halogen lamp: 4 x 315 W/VA to 2 x 500 W/VA. Electronic C-transformers with LED/low-voltage halogen lamp: 4 x 315 W/VA to 2 x 500 W/VA. Electronic LC-transformers with LED/low-voltage halogen lamp: 4 x 120 W/VA to 2 x 200 W/VA.