Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
TMR-E12 with error memory, 24 V AC/DC, 2 changeover contacts |
Marque |
METZ CONNECT
|
Catégories |
Monitoring Relays
|
Pays d’origine |
DE |
Code du système harmonisé |
9030 4000 00
|
Enregistrement d'erreurs possible |
Yes |
Nombre de circuits de mesure |
1 |
Réarmement externe possible |
Yes |
Type de connexion électrique |
Raccordement à vis |
Détails d’emballage
Niveau d’emballage 1 |
4250184118695 |
Niveau d’emballage 2 |
4250184118695 |
Autres données techniques
Largeur |
22.5 mm |
Hauteur |
75 mm |
Profondeur |
100 mm |
Avec pinces détachables |
No |
Nombre de contacts comme contact inverseur |
2 |
Description
The thermistor relay is used as protection relay for motors against thermal overload (inadmissible heating). This heating might be caused by mechanical overload on the shaft or when operating the motor with inadmissible voltages. A PTC thermistor is used as sensor. It should be mounted to the part of the motor that heats most in case of overload (e.g. integrated in motor winding). The device can also be used for motors with integrated thermo switch. Integrated fault memory with reset key at the front., Variant:, 24 V AC/DC, 2 changeover contacts (DPST)