Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
T/M 4 |
| Marque |
METZ CONNECT
|
| Catégories |
Bus System Devices (KNX/Modbus)
|
| Pays d’origine* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Code du système harmonisé |
8517 6200 00
|
| Modèle |
Direct/transformateur |
| Type de connexion |
Direct |
Détails d’emballage
| Niveau d’emballage 1 |
4250184122487, 4250184122487 |
Autres données techniques
| Système de bus KNX |
No |
| Système de bus radio fréquent |
No |
| Système de bus Powernet |
No |
| Commutateur de tarif |
No |
| Puissance réactive |
No |
| Approuvé selon PTB |
No |
| Autres systèmes de bus |
Autre |
| Système de bus LON |
No |
| Système de bus KNX radio |
No |
| Fréquence radio bidirectionnelle |
No |
| Profondeur minimale de la boîte d'encastrement |
60 mm |
Description
Temperature converter to connect up to 4 different resistance temperature sensors in dual cable technology with a resolution in 0.1 K. The addressing of the 4 temperature sensors is done via 4 M-Bus addresses according to M-Bus standard DIN EN-1434-3. The temperature is directly converted in the device. The temperature converter occupies 4 clear M-Bus addresses specified by the manufacturer. It is possible to set for each channel 1 of 11 stored temperature sensor characteristics with the M-Bus configuration tool (www.metz-connect.com) or to transmit the resistance value directly. The cable length compensation is done with the push-button assigned to the respective temperature input. The factory setting is: -30 °C to 130 °C / PT1000.Connection with screw type terminal blocks