Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!

Accueil

Automatics and control

Accessories (Automatics & control)

switchboard display module FDM 121, 1 connected device, screen 96 x 96 mm, IP54 on front face

switchboard display module FDM 121, 1 connected device, screen 96 x 96 mm, IP54 on front face

En stock: Non Stock fournisseur: Oui Quantité minimale de commande: 1

Prix (hors TVA):

579,214 €

Ce prix est valable jusqu’au 31.12.30

EAN: 3606480025389

MPN: TRV00121

Colis: 1

Boîte: 34

Palette: 816

Délai de livraison estimé à notre entrepôt (environ): Sur demande

Technical Information

État de l’article	Nouveau
Nom du fabricant	switchboard display module FDM 121, 1 connected device, screen 96 x 96 mm, IP54 on front face
Marque	Schneider Electric
Catégories	Accessories (Automatics & control)
Pays d’origine	CN
Type d'accessoire/de pièce de rechange	Autre

Détails d’emballage

Niveau d’emballage 1	3606480025389
Niveau d’emballage 2	3606480025387
Niveau d’emballage 3	3606480025389

Téléchargements

EPB (Code de pratique environnementale) Déclaration EPD (Déclaration environnementale de produit) Manuel technique

Description

This FDM121 is an Ethernet switchboard display module and it is part of EnerlinX communication system. This display unit is compatible with Masterpact, Compact and PowerPact circuit breakers. FDM121 displays the measurements, alarms, and operating assistance data from one circuit breaker over ULP. Its LCD screen offers a high resolution with white backlighting. The FDM121 is equipped with a 24VDC terminal block and two RJ45 sockets for ULP connection. It is easily installed in a switchboard, either through a standard door cut-out (92x92mm) or two 22mm diameter holes. It is a 96 x 96 x 30 mm screen requiring 10 mm behind the door (or 20 mm when the 24 V power supply connector is used) The operating temperature range is between -10°C to 55°C, and the protection degree is IP54 on the front face. The FDM121 display module is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels. The FDM121 firmware can be updated using EcoStruxure Power Commission software.