État de l’article | Nouveau |
Nom du fabricant | Switch-disconnector Compact INS400 3-pole 400A red handle |
Marque | Schneider Electric |
Catégories |
Interrupteurs-sectionneurs
|
Pays d’origine | PL |
Courant permanent nominal Iu | 400 A |
Nombre de pôles | 3 |
Tension nominale de fonctionnement | 0-690 V |
Degré de protection (IP), face avant | IP40 |
Version comme interrupteur principal | Yes |
Version comme interrupteur de sécurité | No |
Version comme interrupteur de maintenance/service | Yes |
Courant de courte durée admissible nominal lcw | 20 kA |
Niveau d’emballage 1 | 3303430311300 |
Niveau d’emballage 2 | 3303430311308 |
Niveau d’emballage 3 | 3303430311300 |
Puissance nominale de fonctionnement à AC-3, 400 V | 0 kW |
Nombre de contacts auxiliaires comme contact normalement ouvert | 0 |
Nombre de contacts auxiliaires comme contact normalement fermé | 0 |
Courant de court-circuit nominal conditionné Iq | 0 kA |
Nombre de contacts auxiliaires comme contact inverseur | 4 |
Nombre d'interrupteurs | 1 |
Interverrouillable | Yes |
Entraînement moteur intégré | No |
Type de connexion électrique du circuit principal | Raccordement à vis |
Version comme installation d'arrêt d'urgence | Yes |
Type d'élément de commande | Poignée tournante longue |
Puissance nominale de fonctionnement à AC-23, 400 V | 200 kW |
Élément de contrôle des couleurs | Rouge |
Adapté au montage au sol | Yes |
Adapté au montage frontal 4 trous | Yes |
Adapté au montage frontal au centre | Yes |
Adapté à l'installation d'un tableau de distribution | Yes |
Adapté au montage intermédiaire | No |
Tension nominale maximale de fonctionnement Ue AC | 690 V |
Entraînement moteur en option | No |
Déclencheur de tension en option | No |
Construction de l'appareil | Dispositif à encastrer technique d'encastrement fixe |
Courant permanent nominal à AC-21, 400 V | 0 A |
Puissance de commutation à 400 V | 0 kW |
Version comme interrupteur d'inversion | No |
Courant permanent assigné à AC-23, 400 V | 400 A |
This Compact INS400 is a 3 poles non-automatic switch-disconnector with red rotary handle and yellow front. It is suitable for isolation with positive contact indication, as defined by IEC 60947-1 and IEC60947-3 standards. The operational current is 400A at 415VAC in categories AC22A and AC23A. The rated voltage is 690VAC 50/60Hz or 250VDC. It can be used as an emergency-off device. For easy identification, it uses special colours stipulated by the standards. The red rotary handle is designed to offer easy operation and high performance in interruption of currents. Compact INS400 is a class II insulation level front-face device as per IEC 60664 standard.