Surge protective devices for circuit breakers 2-pole C32 A
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
250,38 €
Ce prix est valable jusqu’au 31.12.25
Délai de livraison estimé à notre entrepôt (environ):
2 weeks
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Surge protective devices for circuit breakers 2-pole C32 A |
Marque |
Dehn
|
Catégories |
Surge Protection Devices (SPD)
|
Pays d’origine |
FR |
Code du système harmonisé |
8536 3030 00
|
Niveau de protection de la tension |
1.5 kV |
Courant de décharge nominal (8/20) |
5 kA |
Tension nominale AC |
230 V |
Degré de protection (IP) |
IP20 |
Configuration du système TN |
Yes |
Détails d’emballage
Niveau d’emballage 1 |
4013364156210, 4013364156210 |
Autres données techniques
Méthode de montage |
Rail DIN (rail chapeau) 35 mm |
Taille de la construction |
4 espacements modulaires |
Tension continue max. AC |
275 V |
Catégorie type 2 |
Yes |
Signalisation sur l'appareil |
Optique |
Fusible de secours intégré |
No |
Section maximale du conducteur solide (solide, toronné) |
25 mm² |
Section maximale des conducteurs flexibles (brins fins) |
16 mm² |
Configuration du système TT |
Yes |
Téléchargements
Description
Pre-wired complete unit, additional wiring of the single devices not necessary. Meets the requirements of EN 50550 "Power frequency overvoltage protective device". High reliability due to "Thermo Dynamic Control" SPD monitoring device. For protecting low-voltage consumer's installations against transient and temporary overvoltages (SPD+POP). For installation in conformity with the lightning protection zone concept at the boundaries from 0B-1 and higher.