Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Surge arrester type 2 DEHNguard M 2-pole Uc 385V w. ACI technology image 1
Surge arrester type 2 DEHNguard M 2-pole Uc 385V w. ACI technology image 2
Surge arrester type 2 DEHNguard M 2-pole Uc 385V w. ACI technology image 3
Surge arrester type 2 DEHNguard M 2-pole Uc 385V w. ACI technology thumbnail 1
Surge arrester type 2 DEHNguard M 2-pole Uc 385V w. ACI technology thumbnail 2
Surge arrester type 2 DEHNguard M 2-pole Uc 385V w. ACI technology thumbnail 3

Surge arrester type 2 DEHNguard M 2-pole Uc 385V w. ACI technology

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
333,68 €
Ce prix est valable jusqu’au 31.12.25
EAN: 4013364387867
MPN: 952122
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 2 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant Surge arrester type 2 DEHNguard M 2-pole Uc 385V w. ACI technology
Marque Dehn
Catégories Surge Protection Devices (SPD)
Pays d’origine DE
Code du système harmonisé 8536 3030 00
Courant de décharge nominal (8/20) 20 kA
Tension nominale AC 230 V
Niveau de protection de la tension L-N 1.5 kV
Degré de protection (IP) IP20
Configuration du système TN Yes

Détails d’emballage

Niveau d’emballage 1 4013364387867, 4013364387867

Autres données techniques

Méthode de montage Rail DIN (rail chapeau) 35 mm
Avec contact de signalisation à distance Yes
Nombre de conducteurs (sans mise à la terre) 2
Taille de la construction 2 espacements modulaires
Tension continue max. AC 385 V
Catégorie type 2 Yes
Signalisation sur l'appareil Optique
Niveau de protection de la tension N-PE 1.5 kV
Fusible de secours intégré Yes
Section maximale du conducteur solide (solide, toronné) 35 mm²
Section maximale des conducteurs flexibles (brins fins) 25 mm²
Configuration du système TN-S No
Configuration du système TT Yes
Pouvoir de coupure en court-circuit (Isccr) 25 kA
Courant de fuite libre Yes

Téléchargements

Description

Multipole DEHNguard M ACI surge arrester type 2 according to EN 61643-11 with integrated ACI switch / spark-gap combination consisting of a base part and plug-in protection modules. High reliability due to Thermo Dynamic Control SPD monitoring device. For protecting low-voltage consumer's installations against surges. For use in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher.