Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
SUG-F-1.1 Split Unit Gateway, FM image 1
SUG-F-1.1 Split Unit Gateway, FM image 2
SUG-F-1.1 Split Unit Gateway, FM image 3
SUG-F-1.1 Split Unit Gateway, FM thumbnail 1
SUG-F-1.1 Split Unit Gateway, FM thumbnail 2
SUG-F-1.1 Split Unit Gateway, FM thumbnail 3

Rozhraní pro klimatizační jednotky

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
121,551 € par pièce
Ce prix est valable jusqu’au 31.12.30
EAN: 4016779945578
MPN: 2CDG510005R0011
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): Sur demande

Technical Information

État de l’article Nouveau
Nom du fabricant SUG-F-1.1 Split Unit Gateway, FM
Marque ABB
Catégories Sensors
Code du système harmonisé 8517 6200 00
Méthode de montage Montage encastré (plâtre)
Modèle Interface IR
Nombre de canaux 0
Consommation électrique 0 W
Système de bus KNX FALSE
Système de bus radio fréquent FALSE
Système de bus Powernet FALSE
Largeur en nombre d'espacements modulaires 0
Autres systèmes de bus free@home
Système de bus LON FALSE
Protection contre le démontage FALSE
Interface radio FALSE
Interface IR TRUE
Protocole Autre
Dépendant du fournisseur FALSE
Possibilité de mise à jour TRUE
Visualisation FALSE
Serveur web FALSE
Degré de protection (IP) IP20
Avec indication LED TRUE
Système de bus KNX radio FALSE
Fréquence radio bidirectionnelle FALSE
Nombre maximal d'appareils par canal 0

Détails d’emballage

Niveau d’emballage 1 4016779945578

Téléchargements

Description

The device is used to interface between the free@home system and many manufacturers’ air conditioners, so-called split units. The device converts the free@home telegrams into infrared commands and transmits them to the split unit. The transmitter of the supplied cable is bonded directly onto the split unit’s receiver. The split unit then no longer receives the commands from a remote control. Instead, it can be operated via any free@home sensors. The model of the split unit can be selected during commissioning. Auxiliary voltage is not required.