Motion sensor
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
Prix sur demande
Ce prix est valable jusqu’à épuisement des stocks
Délai de livraison estimé à notre entrepôt (environ):
Sur demande
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
SLN2 MWS Set - Motion sensor |
Marque |
Zumtobel
|
Catégories |
Accessoires pour luminaires
Luminaires
|
Pays d’origine |
AT |
Code du système harmonisé |
9405 9900 00
|
Largeur |
69 mm |
Hauteur |
51 mm |
Type d'accessoire/de pièce de rechange |
Autre |
Longueur de la prise |
124 mm |
Détails d’emballage
Niveau d’emballage 1 |
9010757043688, 9010757043688 |
Autres données techniques
Couleur |
Autre |
Matériau |
Autre |
Téléchargements
Description
Radar motion detector (5.8 GHz) and brightness sensor for typical sensor heights of 2.5 to max. 6 m with nominal detection range of 8-10 m diameter, becoming less with lower mounting heights. The detection range can be restricted using settings on the device. Delay time can be set via a dip switch to 5 sec, 30 sec, 1 min, 5 min, 20 min and 30 min. The maximum switching capacity of the output contact is 400 W. For initial activation of the corridor function, the ON signal on DA/DA for the control gear units must be present for at least 5 minutes. With absence and expired delay time: slow fading to 10% light level (can be modified with control gear unit via master configurator).