Shutter actuator flush-box mount with local input
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
109,22 €
Ce prix est valable jusqu’au 24.12.25
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Shutter actuator flush-box mount with local input |
Marque |
EATON
|
Catégories |
Bus System Devices (KNX/Modbus)
|
Pays d’origine |
CZ |
Code du système harmonisé |
8536 5080 00
|
Méthode de montage |
Montage encastré (plâtre) |
Système de bus KNX |
No |
Système de bus Powernet |
No |
Nombre maximal de sorties vénitiennes |
1 |
Largeur en nombre d'espacements modulaires |
3 |
Autres systèmes de bus |
xComfort |
Opération locale/opération manuelle |
No |
Avec fonction de commutation |
No |
Avec indication LED |
Yes |
Détails d’emballage
Niveau d’emballage 1 |
9010653003564 |
Niveau d’emballage 2 |
9010238224124 |
Autres données techniques
Type de courant |
AC |
Nombre d'entrées |
1 |
Système de bus radio fréquent |
Yes |
Puissance de commutation max. |
690 W |
Avec connexion de bus |
Yes |
Courant de commutation (résistif) |
3 A |
Système de bus LON |
No |
Degré de protection (IP) |
IP20 |
Système de bus KNX radio |
No |
Fréquence radio bidirectionnelle |
Yes |
Module de bus détachable |
No |
Profondeur minimale de la boîte d'encastrement |
18 mm |
Description
The flush-mounted shutter actuators with local input are particularly characterized by their slim dimensions and extended control functionality. The actuator control drives of shutters, blinds, shades etc. are equipped with a 230 V AC motor (up to 3 A) and an integrated end-position switch. The device tracks the actual position of the shades and has predefined, selectable profiles to optimize the operation of the to be controlled application, e.g. shutters, slatted blinds, awnings etc. Furthermore, the actuator also provides numerous safety functions such as a safety position in case of wind and / or rain as well as a lockout protection to ensure shutters or blinds will not close if the terrace door is open. The mains-powered solution is typically placed in an installation box and combined with either a socket outlet or a wireless switch. The two 230 V AC local input sensors enable the actuator to be used with an existing or any other mechanical push-switch available on the market. Note: Never connect multiple shading motors in parallel to a single shutter actuator without integrating a cut-off relay.