Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
servo motor BCH, 40mm, 100W, w oil seal, w key, leads con
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
337,46 €
EAN: 3606480733468
MPN: BCH2MB0133CA5C
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
Sur demande
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | servo motor BCH, 40mm, 100W, w oil seal, w key, leads con |
| Marque | Schneider Electric |
| Catégories |
Control gear
|
| Pays d’origine | CN |
| Model | Rotary current synchronous motor |
| Voltage type | AC |
| Rated current | 4.5 A |
| Rated voltage | 220 V |
| Number of phases | 3 |
| Construction type | IM 3001 (B5) |
| Number of poles | 0 |
| Rated frequency | 50-60 Hz |
| Operating temperature | -20-40 °C |
| Rated rotational speed at rated frequency | 3000 1/min |
| Rated performance at rated frequency | 0.75 kW |
| Degree of protection (IP) | IP54 |
| Duty cycle | Other |
| Frame size according to IEC | 80 mm |
| Full-load efficiency | 0 % |
| Starting current ratio | 0 |
| Starting torque ratio | 0 |
| Breakdown torque ratio | 0 |
| Voltage anti-condensation heater | 0 V |
| Output power anti-condensation heater | 0 W |
| With positive temperature coefficient resistor (PTC) | No |
| With resistance temperature detector (RTD) | No |
| Intrinsic safety (IS) | None |
| Overload capability | Yes |
| Cooling method | Other |
| Shaft end type | Parallel key |
| Vacuum pressure impregnation (VPI) | None |
| Suitable for frequency control | No |
| Bearing | Ball bearing |
| Insulation class according to IEC | F |
| With anti-condensation | No |
| Nominal torque | 2.39 Nm |
| Power factor | 0 |
Détails d’emballage
| Niveau d’emballage 1 | 3606480733468 |