Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
SENSA MRE DDP HIBAY - Passive Infrared detector image 1
SENSA MRE DDP HIBAY - Passive Infrared detector image 2
SENSA MRE DDP HIBAY - Passive Infrared detector thumbnail 1
SENSA MRE DDP HIBAY - Passive Infrared detector thumbnail 2
Thorn

SENSA MRE DDP HIBAY - Passive Infrared detector

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
280,50 €
Ce prix est valable jusqu’au 24.12.25
EAN: 5037319228806
MPN: 96601982
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 4-6 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant SENSA MRE DDP HIBAY - Passive Infrared detector
Marque Thorn
Catégories Bus System Devices (KNX/Modbus)
Pays d’origine GB
Système de bus KNX No
Degré de protection (IP) IP44

Détails d’emballage

Niveau d’emballage 1 5037319228806

Autres données techniques

Système de bus radio fréquent No
Système de bus Powernet No
Système de bus LON No
Système de bus KNX radio No

Téléchargements

Déclaration DOC CE (Déclaration de conformité CE)

Description

The SENSA MRE DDP HIBAY recessed PIR Presence/Absence Detector provides automatic control (on/off switching and dimming) of lighting loads, with optional manual control. It can be used on DSI/DALI digital dimming ballasts over 1 or 2 channels (1 dimming + 1 switching). The dimming channel of the detector can be used to control the light output of luminaires that are fitted with dimming ballasts. The detector measures the overall light level in the detection area and calculates the correct output for the luminaires, to achieve a pre-set lux level (maintained illuminance). The switching channel of the detector can either be used to isolate the supply to the dimming ballasts (saving on the standby current of the ballasts) or to switch a separate channel of standard, non-dimming luminaires.An integral sensitivity adjustment allows the detector to be fine-tuned to its environment. This detector allows flush mounting into a ceiling tile, or surface mounting using a detector back box.The SWITCHLITE MRE SLD HIBAY detector is suitable for HiBay application up to 17 metres.