Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Current-limiting relay capacitive, 1 NO contact 16A image 1
ELTAKO

Current-limiting relay capacitive, 1 NO contact 16A

Commande uniquement
Prix (hors TVA):
32,84 €
Ce prix est valable jusqu’au 31.12.25
EAN: 4010312205457
MPN: 22100430
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 2-4 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant Current-limiting relay capacitive, 1 NO contact 16A
Marque ELTAKO
Catégories Current Limiters
Pays d’origine CN
Code du système harmonisé 8536 4900 00
Méthode de montage Rail DIN
Courant permanent nominal Iu 16 A
Courant de court-circuit nominal conditionné Iq 0.02 kA
Puissance apparente maximale 1200 VA

Détails d’emballage

Niveau d’emballage 1 4010312205457, 4010312205457
Niveau d’emballage 2 4010312205457
Niveau d’emballage 3 4010312205457

Autres données techniques

Limiteur de courant de court-circuit No

Téléchargements

Lien profond vers la page du produit

Description

1 NO contact 16A/250V AC. No standby loss. Modular device for DIN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Max. capacitive load 240μF downstream of rectifier (e.g. energy saving lamps and electronic ballast) or 120μF directly at the mains (e.g. shunt-compensated fluorescent lamps). Limiting resistor 12Ω, limiting period approx. 15ms. The starting current impulse of energy saving lamps, fluorescent lamps and compact fluorescent lamps is limited to 20A by short-time switch-on (approx. 15ms) of heavy-duty resistors (12Ω). The current-limiting relay is connected on the load side of the protected relay contact. Permanent load max. 1200W, max. switching frequency 600/h. Explanation of capacitive load specification: The specified max. capacitive load directly at the mains is the deciding factor determining shunt-compensated fluorescent lamps or conventional ballast, for example. Here the capacitor switched in parallel to the mains is the deciding factor determining the correct dimensioning per lamp. The specified max. capacitive load downstream of the rectifier is the deciding factor determining fluorescent lamp ballast or energy saving lamps, for example. An equivalent capacitance of 10µF per lamp may be calculated.