Round cable 40-pin, 40 pole and 50 pole with IDC connector, L= 2.5m
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
54,82 €
par pièce
Ce prix est valable jusqu’au 24.12.25
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Round cable 40-pin, 40 pole and 50 pole with IDC connector, L= 2.5m |
Marque |
Siemens
|
Catégories |
PLC Accessories
|
Pays d’origine |
RO |
Code du système harmonisé |
8544 4290 00
|
Fonction |
PLC - autres appareils |
Détails d’emballage
Niveau d’emballage 1 |
4025515155690 |
Autres données techniques
Nombre de pôles |
40 |
Longueur de la prise |
2.5 m |
Type de connexion électrique, côté boîte |
Carte de connexion |
Type de connexion électrique, sur le terrain |
Carte de connexion |
Adapté à la carte d'entrée PLC |
Yes |
Adapté à la carte de sortie PLC |
Yes |
Adapté aux signaux numériques |
Yes |
Adapté aux signaux analogiques |
No |
Description
Connecting cable unshielded for SIMATIC S7-1500 64 I/O between I/O modul X10 or X11 and connection module 32 I/O 0.14 mm2, L = 2.5m, 1 pcs. 40 of 50 pole IDC connector The 40-pin round cable (unshielded) with a length of 2.5m is assembled on the side of the I/O card with 40-pin IDC plugs and on the side of the connection module with a 50-pin IDC plug. This pre-assembled cable enables a trouble-free and safe signal flow. Thus, even complex installations remain manageable and can be checked in the shortest possible time, which makes maintenance and expansion affordable.
This pre-assembled connecting cable is part of the fully modular SIMATIC TOP connect connection for the fastest and safest system cabling. In addition to low wiring costs, error sources in cabling can be significantly reduced. Sensors and actuators from the peripherals are connected to the connection modules of SIMATIC TOP connect and connected to the SIMATIC S7-1500 via connecting cable and front plug-in module.