Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
Energy Meter Sensor |
| Marque |
EATON
|
| Catégories |
Bus System Devices (KNX/Modbus)
|
| Pays d’origine* |
CZ |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Code du système harmonisé |
9031 4100 00
|
| Modèle |
Autre |
| Type de connexion |
Direct |
| Interface d'impulsion S0 |
Aucun |
| Classe de précision |
0 |
Détails d’emballage
| Niveau d’emballage 1 |
4015081332595 |
| Niveau d’emballage 2 |
9008790804694 |
Autres données techniques
| Système de bus KNX |
No |
| Système de bus radio fréquent |
Yes |
| Système de bus Powernet |
Yes |
| Commutateur de tarif |
No |
| Puissance réactive |
No |
| Approuvé selon PTB |
No |
| Autres systèmes de bus |
xComfort |
| Système de bus LON |
No |
| Système de bus KNX radio |
No |
| Fréquence radio bidirectionnelle |
Yes |
| Profondeur minimale de la boîte d'encastrement |
26 mm |
Description
The zenergy measuring sensorz is used to record the solar energy implemented in the PV inverter and then subsequently transfer this to the display on the room-manager with zenergy management functionz. This device type is used for device types for higher outputs of 3 - 3680 kW. In doing so, current, voltage, active power and electrical energy are determined. The zenergy measuring sensorz is preferably connected to the feed point in the electrical system. the device is mounted in the switch, junction or installation box. The device is not sealed and is therefore not suitable for the purpose of billing! Attention!: Does not work with xComfort Bridge