Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Energy Meter Sensor with external sensor image 1
Energy Meter Sensor with external sensor image 2
Energy Meter Sensor with external sensor image 3
Energy Meter Sensor with external sensor image 4
Energy Meter Sensor with external sensor thumbnail 1
Energy Meter Sensor with external sensor thumbnail 2
Energy Meter Sensor with external sensor thumbnail 3
Energy Meter Sensor with external sensor thumbnail 4

Energy Meter Sensor with external sensor

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
141,98 €
Ce prix est valable jusqu’au 24.12.25
EAN: 4015081332588
MPN: 136476
Colis: 1
Boîte: 60
Délai de livraison estimé à notre entrepôt (environ): 4-6 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant Energy Meter Sensor with external sensor
Marque EATON
Catégories Sensors
Pays d’origine CZ
Code du système harmonisé 9031 4100 00
Modèle Autre
Type de connexion Convertible
Système de bus KNX No
Système de bus radio fréquent Yes
Système de bus Powernet Yes
Commutateur de tarif No
Interface d'impulsion S0 Aucun
Puissance réactive No
Classe de précision 0
Approuvé selon PTB No
Autres systèmes de bus xComfort
Système de bus LON No
Système de bus KNX radio No
Fréquence radio bidirectionnelle Yes
Profondeur minimale de la boîte d'encastrement 26 mm

Détails d’emballage

Niveau d’emballage 1 4015081332588
Niveau d’emballage 2 9008790804700, 9008790804700

Description

The zenergy measuring sensor with external sensorz is used to record the solar energy implemented in the PV inverter and then subsequently transfer this to the display on the room-manager with zenergy management functionz. This device type is used for device types for higher outputs of 15 W-23 kW. In doing so, current, voltage, active power and electrical energy are determined. the external sensor of the energy measuring sensor is plugged into the electrical system via the output line, preferably at the feed point. The device is mounted in the switch, junction or installation box. The device is not sealed and is therefore not suitable for the purpose of billing! Attention!: Does not work with xComfort Bridge

Remplacement

Accessoire

Accessoire