RF h-h transm. 2-g KNX anthra.

RF hand-held transmitter, 2-gang for KNX anthracite RF hand-held transmitters for KNX make the controller "mobile": From any point in the house, the required KNX function can be triggered conveniently by "remote control". The RF hand-held transmitters for KNX transmit KNX telegrams wirelessly when the button is pressed, depending on the parameter setting when the application program is loaded. These could include telegrams for switching pressing, dimming, or blind control. It is also possible to program encoder functions (dimming encoders and scene auxiliary units). Features: Confirmation function as well as transmit and status display via two-colour LED (red green) separately for each button by 2-stage display function. Optional status display by separate 1-bit status communication objects. Transmit and confirmation display deactivatable. Project planning, start-up and parameter setting are performed using ETS (version 5 or later). Battery-operated device. "Switching" function: Rocker or button function. Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no reaction). "Dimming" function: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (lighter - ON, darker - OFF). "Blind" function: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (ON, OFF, CHANGE). Time between short and long-term command can be set in the parameters. "Value transmitter" and "Scene auxiliary unit" functions: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (values 0 to 255, 0 to 100% or scene number). With scene auxiliary unit: Memory function possible. Notes : Batteries are consumables and must be replaced regularly. Please observe the regulations on the disposal of used batteries.