Interface, ethernet communication, LAN
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
221,70 €
Ce prix est valable jusqu’au 24.12.25
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Interface, ethernet communication, LAN |
Marque |
EATON
|
Catégories |
Bus System Devices (KNX/Modbus)
|
Pays d’origine |
CZ |
Code du système harmonisé |
8517 6100 00
|
Méthode de montage |
Montage en surface (plâtre) |
Modèle |
Interface des systèmes LAN |
Système de bus KNX |
No |
Système de bus Powernet |
No |
Largeur en nombre d'espacements modulaires |
0 |
Autres systèmes de bus |
Aucun |
Détails d’emballage
Niveau d’emballage 1 |
4015081521579 |
Niveau d’emballage 2 |
9008790804182 |
Autres données techniques
Type de tension |
DC |
Nombre de canaux |
99 |
Consommation électrique |
2.5 W |
Système de bus radio fréquent |
Yes |
Système de bus LON |
No |
Protection contre le démontage |
No |
Interface radio |
Yes |
Interface IR |
No |
Protocole |
TCP/IP |
Dépendant du fournisseur |
No |
Possibilité de mise à jour |
Yes |
Visualisation |
No |
Serveur web |
Yes |
Tension de fonctionnement |
5 V |
Degré de protection (IP) |
IP20 |
Avec indication LED |
Yes |
Système de bus KNX radio |
No |
Fréquence radio bidirectionnelle |
Yes |
Nombre maximal d'appareils par canal |
1 |
Description
The Ethernet interface is used for communication in large networking ILU XComfort system. The ILU s through a LAN network interconnected (existing or additional LAN network). The ILU communicate all further things with the Xcomfort radio technology. Depending on the application, the ILU s are configurable as LAN router or area knot. Xcomfort-routing is not possible, LAN routing can be used. if individual levels in which xComfort is used are networked with one-another via LAN/WAN, the ECI N/O can also be used as area node. The MFR 2.0 or higher are necessary for the commissioning. A system integration 3 rd party applications, such as, e.g.: a central hotel software is also possible. The mounting is carried out using a mounting base plate on the wall. The supply of the ECI is carried out via a separate power supply unit (not supplied as standard). Attention!: Does not work with xComfort Bridge