Remote control, alarm, 1-way
En stock: Non
Stock fournisseur: Oui
Quantité minimale de commande: 1
Ce prix est valable jusqu’au 24.12.25
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Remote control, alarm, 1-way |
Marque |
EATON
|
Catégories |
Bus System Devices (KNX/Modbus)
|
Pays d’origine |
CZ |
Code du système harmonisé |
8526 9200 00
|
Modèle |
Emetteur manuel |
Système de bus KNX |
No |
Système de bus radio fréquent |
Yes |
Avec connexion de bus |
Yes |
Autres systèmes de bus |
Aucun |
Système de bus LON |
No |
Système de bus KNX radio |
No |
Fréquence radio bidirectionnelle |
Yes |
Détails d’emballage
Niveau d’emballage 1 |
4015081403318 |
Niveau d’emballage 2 |
4015081905874 |
Autres données techniques
Méthode de montage |
Autre |
Couleur |
Gris |
Protection de surface |
Non traité |
Nombre de canaux |
1 |
Qualité des matériaux |
Thermoplastique |
Matériau |
Plastique |
Numéro RAL (similaire) |
7037 |
Transparent |
No |
Finition de la surface |
Mat |
Description
The single-alarm remote control sends a signal to the convenient electrical installation's actuators when pressed. The mobile device is powered with a button cell (CR2430). The remote control can be assigned to the room-manager's safety function in oThe alarm remote control remote control with a 1-channel transmits a signal to the actuators of the xComfort electrical installation as soon as the alarm button is pressed. The mobile device is power-supplied by a coin cell battery (CR2430). It can be assigned to the safety function of the Room Manager in order to set off an alarm, for example. If the remote control is assigned to an actuator, it works in the “current-pulse mode“. The remote control is easy to fix at the key ring, key ribbon or at a hanger clip (not included in the scope of delivery). But it is also possible to use an optional magnet-type wall-fixing (110771 - to be ordered separately). Attention!: Does not work with xComfort Bridge