Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!

Accueil

Installation

Distribution boards

REGplus IP20 C6Amodul 180°M

METZ CONNECT

REGplus IP20 C6Amodul 180°M

Name: REGplus IP20 C6Amodul 180°M
Brand: METZ CONNECT
Price: 17.980 EUR
Availability: PreOrder

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1

Prix (hors TVA):

17,98 €

Ce prix est valable jusqu’au 24.12.25

EAN: 4250184136545

MPN: 130B117003-E

Colis: 1

Boîte: 10

Délai de livraison estimé à notre entrepôt (environ): 4-6 weeks

Technical Information

État de l’article	Nouveau
Nom du fabricant	REGplus IP20 C6Amodul 180°M
Marque	METZ CONNECT
Catégories	Distribution boards
Pays d’origine	DE
Code du système harmonisé	8536 6990 00
Matériau	Métal
Type de fixation	Rail DIN (rail chapeau) 35 mm
Type d'adaptateur pour rail DIN	Droit

Détails d’emballage

Niveau d’emballage 1	4250184136545
Niveau d’emballage 2	4250184136545

Description

Termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations, equipped with C6, Amodul 180° RJ45 individual modulecable feed 45° from the top, plug direction 45° downwards, certified to GHMT Cat.6, A re-embedded PVPCat.6, A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certifiedcompliance with class E, A up to 500 MHz according to ISO/IEC 11801, DIN EN 50173-1tested: component up to 600 MHz, link up to 800 MHz, suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, easy to install connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC), conductor assignment to T568A and T568B is directly printed on the stuffer cap, migration to 25G-systems without special tools, width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels, When mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal, A cover protects the module against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed. In this case, it is necessary to remove the equipotential bonding spring.integrated dust protection cover (also colored)