Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
REG emergency power supply, light grey image 1
REG emergency power supply, light grey image 2
REG emergency power supply, light grey image 3
REG emergency power supply, light grey image 4
REG emergency power supply, light grey thumbnail 1
REG emergency power supply, light grey thumbnail 2
REG emergency power supply, light grey thumbnail 3
REG emergency power supply, light grey thumbnail 4

REG emergency power supply, light grey

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
153,162 €
Ce prix est valable jusqu’au 31.12.30
EAN: 3606485100265
MPN: MTN683901
Colis: 1
Boîte: 10
Délai de livraison estimé à notre entrepôt (environ): Sur demande

Technical Information

État de l’article Nouveau
Nom du fabricant REG emergency power supply, light grey
Marque Schneider Electric
Catégories Sensors
Pays d’origine DE
Méthode de montage DRA (adaptateur pour rail DIN)
Nombre de bobines d'arrêt intégrées 0
Nombre de lignes à alimenter 0
Courant de sortie max. 640 mA
Tension secondaire 230 V
Système de bus KNX Yes
Système de bus radio fréquent No
Système de bus Powernet No
Tension de bus stockable No
Largeur en nombre d'espacements modulaires 4
Autres systèmes de bus Aucun
Système de bus LON No
Avec indication LED Yes
Système de bus KNX radio No

Détails d’emballage

Niveau d’emballage 1 3606485100265
Niveau d’emballage 2 3606485100263

Téléchargements

Description

REG emergency power supply. To buffer the bus voltage. If a complete mains failure occurs, an external lead gel battery with a voltage of DC 12 V (SELV) can be connected to the REG power supply for buffering. The lead gel battery is recharged or maintained in its charged state by integrated charging electronics. A binary input can be connected in order to register the operational statuses (mains voltage, error warning, battery operation). For installation on DIN rails TH35 according to EN 60715. A data rail is not necessary. Nominal voltage: AC 110-230 V ±10%. Operating voltage: min. AC 92 V - max. AC 253 V. Mains frequency: 50-60 Hz ±10%. Output to power supply: Output voltage: DC 30 V ±2 V. Output current: without battery with mains supply max. 300 mA, with battery without mains supply max. 640 mA. Buffer time with lead gel battery 7,2 Ah: MTN683890: approx. 0.5 h. MTN683832: approx. 1 h. Buffer time with lead gel battery 18 Ah: MTN683890: approx. 1.25 h. MTN683832: approx. 2.5 h. Short-circuit current: 1.5 A. Charging current: max. 1 A. Connections: plug-in screw terminal for main connector, operating state (4-pin, 3 floating contacts) and emergency power supply. Plug-in terminal for battery connection (two 1 mm pins). Device width: 4 modules, approx. 72 mm. Contents: With connecting terminal and cable cover. Colour: light grey.