Power cube with 4 SCHUKO socket outlets, IP44
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Ce prix est valable jusqu’au 31.12.25
Délai de livraison estimé à notre entrepôt (environ):
3-6 weeks
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Power cube with 4 SCHUKO socket outlets, IP44 |
Marque |
ABL
|
Catégories |
CEE Sockets
|
Pays d’origine |
DE |
Code du système harmonisé |
8537 1098 00
|
Manipulation |
Accrochable |
Degré de protection (IP) |
IP44 |
Modèle militaire |
No |
Détails d’emballage
Niveau d’emballage 1 |
4011721160535, 4011721160535 |
Niveau d’emballage 2 |
4011721160535 |
Autres données techniques
Couleur |
Gris |
Nombre de prises de courant avec contact de protection (SCHUKO) |
4 |
Protection |
Aucun |
Matériau du boîtier |
Plastique |
Interrupteur différentiel |
Aucun |
Alimentation électrique/possibilité de connexion |
1 câble (ligne de dérivation) |
Nombre de disjoncteurs miniatures |
0 |
Nombre de prises de courant standard suisse type 13 |
0 |
Nombre de prises de courant standard suisse type 15 |
0 |
Nombre de prises de courant standard suisse type 23 |
0 |
Nombre de prises de courant standard suisse type 25 |
0 |
Description
The power cube can be unhooked and is pre-wired ready for connecting. Every power cube, including any built-in devices, is individually quality checked according to EN 61439-3. The entire power cube is splash protected according to IP 44. The housing is made of polyamide plastic. This high quality plastic is characterized especially by its excellent strength and toughness. The housing colour is light grey (electrical grey). Without accessories, the cube measures 160 x 104 x 104 mm (HxWxD). The power cube is equipped with 4 x SCHUKO sockets. The housing has a hanger and a supply cable inlet (screw fastening) at the top. The screw fastening is suitable for 3 x 1.5 mm² to 5 x 6 mm² supply cables. The outside diameter of the supply cable must not exceed 19 mm. A terminal block is available to connect the supply cable. The terminal block is suitable for 5 x 6 mm² (solid wire) supply cables.