Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Powerline sensor inputs, 8 channels, internal low voltage
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
90,96 €
EAN: 4010312316719
MPN: 31800001
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Powerline sensor inputs, 8 channels, internal low voltage |
| Marque | ELTAKO |
| Catégories |
Sensors
|
| Pays d’origine | CN |
| Code du système harmonisé | 8526 9200 00 |
| Méthode de montage | Montage encastré (plâtre) |
| Modèle | Autre |
| Nombre d'entrées | 8 |
| Système de bus KNX | No |
| Système de bus radio fréquent | No |
| Système de bus Powernet | Yes |
| Autres systèmes de bus | Aucun |
| Système de bus LON | No |
| Système de bus KNX radio | No |
Détails d’emballage
| Niveau d’emballage 1 | 4010312316719, 4010312316719 |
| Niveau d’emballage 2 | 4010312316719 |
| Niveau d’emballage 3 | 4010312316719 |
Téléchargements
Description
Powerline sensor input with 8 channels. 53x43mm, 25mm deep for mounting in 58mm switch boxes. 8 sensor inputs with internal low voltage. Standby loss only 0,5 watt. To control and switch at different places. Use only potential free switching elements. Internal low voltage applied to the sensor inputs. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above them is a slide switch which functions as a configuration switch. Position 0: 2 adjacent inputs as direction pushbuttons for UP/DOWN or ON/OFF. Position 1: All sensor inputs function separately as NO contacts. Position 2: All sensor inputs function separately as pushbuttons. This setting always affects all 8 inputs. The setting can only be changed after a reset. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm². The addresses of the 8 inputs can also be freely assigned if necessary using the PC software SIENNA-Professional. The socket strip located above this has 9 plug-in wires with wire end-sleeves. 8 control inputs with internal low voltage.