Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Powerline sensor input 230V image 1
ELTAKO

Powerline sensor input 230V

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
90,55 €
Ce prix est valable jusqu’au 31.12.25
EAN: 4010312316740
MPN: 31100007
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 2-4 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant Powerline sensor input 230V
Marque ELTAKO
Catégories Bus System Devices (KNX/Modbus)
Pays d’origine CN
Code du système harmonisé 8526 9200 00
Méthode de montage Montage encastré (plâtre)
Modèle Autre
Système de bus KNX No
Autres systèmes de bus Aucun

Détails d’emballage

Niveau d’emballage 1 4010312316740, 4010312316740
Niveau d’emballage 2 4010312316740
Niveau d’emballage 3 4010312316740

Autres données techniques

Nombre d'entrées 1
Système de bus radio fréquent No
Système de bus Powernet Yes
Système de bus LON No
Système de bus KNX radio No

Téléchargements

Lien profond vers la page du produit

Description

Powerline sensor input with 1 channel. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Sensor input 230V. Standby loss only 0,5 watt. To control and switch at different places. When pressed, the sensor input acts on all actuators with the same address or as a central pushbutton if element address 0 is used. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above it is a slide switch which acts as a configuration switch with positions 0, 1 and 2. Position 0: Sensor input with reset function as pushbutton. Position 1: Sensor input functions as NO contact. Position 2: A change-over switch is evaluated as a pushbutton. All entries and configurations can also be accessed via the mains using the PC software SIENNA Professional. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2 mm² to 1.5 mm².