Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Powerline TLZ actuator 1 channel with sensor input 230V
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
90,96 €
EAN: 4010312316702
MPN: 31100004
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Powerline TLZ actuator 1 channel with sensor input 230V |
| Marque | ELTAKO |
| Catégories |
Sensors
|
| Pays d’origine | CN |
| Code du système harmonisé | 8526 9200 00 |
| Méthode de montage | Montage encastré (plâtre) |
| Puissance de sortie | 2000 W |
| Système de bus KNX | No |
| Système de bus radio fréquent | No |
| Système de bus Powernet | Yes |
| Puissance de commutation max. | 2000 W |
| Avec connexion de bus | Yes |
| Nombre max. de contacts de commutation | 1 |
| Courant de commutation max. | 10 A |
| Autres systèmes de bus | Aucun |
| Système de bus LON | No |
| Adapté à la charge C | Yes |
| Possibilité de connecter différentes phases | No |
| Opération locale/opération manuelle | - |
| Avec indication LED | Yes |
| Possibilité d'extension modulaire | No |
| Système de bus KNX radio | No |
| Fréquence radio bidirectionnelle | - |
| Module de bus détachable | No |
| Profondeur minimale de la boîte d'encastrement | 25 mm |
| Puissance de commutation max. | 400 W |
Détails d’emballage
| Niveau d’emballage 1 | 4010312316702, 4010312316702 |
| Niveau d’emballage 2 | 4010312316702 |
| Niveau d’emballage 3 | 4010312316702 |
Téléchargements
Description
Powerline TLZ (staircase time switch) actuator with 1 channel. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Off delay settable from 1 minute to 120 minutes. Switch-off early warning settable. 1 NO contact not potential free 10A/250V AC, incandescent lamps 2000 watts. Sensor input 230V. Standby loss only 0,5 watt. To control and switch at the same place. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the off-delay time. Above it is a slide switch which acts as a configuration switch with positions 0, 1 and 2. Position 0: Pushbutton at sensor input with subsequent switching. Position 1: Same as Position 0 but with switch-off early warning. Position 2: A change-over switch is evaluated as a pushbutton. All entries and configurations can also be accessed via the mains using the PC software SIENNA Professional. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm².