Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
ONLITE local SWITCH MODULE II - DALI switch input device, 4x image 1
ONLITE local SWITCH MODULE II - DALI switch input device, 4x image 2
ONLITE local SWITCH MODULE II - DALI switch input device, 4x image 3
ONLITE local SWITCH MODULE II - DALI switch input device, 4x thumbnail 1
ONLITE local SWITCH MODULE II - DALI switch input device, 4x thumbnail 2
ONLITE local SWITCH MODULE II - DALI switch input device, 4x thumbnail 3
Zumtobel

DALI switch input device, 4x

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
266,83 €
Ce prix est valable jusqu’au 24.12.25
EAN: 9008709641747
MPN: 22169120
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): Sur demande

Technical Information

État de l’article Nouveau
Nom du fabricant ONLITE local SWITCH MODULE II - DALI switch input device, 4x
Marque Zumtobel
Catégories Unités de secours pour luminaires
Pays d’origine DE
Code du système harmonisé 8536 5080 00
Classe de protection II

Détails d’emballage

Niveau d’emballage 1 9008709641747, 9008709641747

Téléchargements

Déclaration DOC CE (Déclaration de conformité CE) Déclaration RoHS Brochure de vente

Description

The ONLITE local Switch Module II is a DALI input device for independent switching of the four emergency lighting circuits of the SB 128 controller from maintained to non-maintained mode. Standard switches or timers with floating contacts can be used for switching the emergency lighting circuits or single luminaires in a circuit. This makes it possible to switch escape sign luminaires and emergency luminaires to non-maintained mode outside of operating times that due to relevant standards and regulations must be normally operated via maintained mode. This enables the service life to be significantly extended and power consumption to be significantly reduced. Supply is via the DALI control line connected at the terminals (no mains connection). Current consumption is max. 4 mA (2 DALI loads). The DALI input can withstand an external voltage of 230/240V. The device is intended for installing in conventional flush-fitting sockets behind the switch. Dimensions: 47.7 x 28.2 x 14.6 mm. Material: halogen-free, flame-retardant polycarbonate. Switches must be designed for at least 15 VDC and are connected to the device leads.