Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
OMK CONT 12A +EL.VGR 120V AC
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
63,45 €
EAN: 3389110410884
MPN: LC2D12G7V
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | OMK CONT 12A +EL.VGR 120V AC |
| Marque | Schneider Electric |
| Catégories |
Modular switches
|
| Pays d’origine | FR |
| Code du système harmonisé | 8536 4900 00 |
| Fonction | Contacteur inverseur |
| Puissance nominale de fonctionnement à AC-3, 400 V | 5.5 kW |
| Nombre de contacts normalement ouverts comme contact principal | 0 |
| Nombre de contacts normalement fermés comme contact principal | 0 |
| Courant nominal de fonctionnement Ie à AC-3, 400 V | 12 A |
| Courant nominal de fonctionnement Ie à AC-1, 400 V | 0 A |
| Tension nominale d'alimentation de commande Us à AC 50HZ | 120 V |
| Tension nominale d'alimentation Us à AC 60HZ | 120 V |
| Degré de protection (IP) | IP20 |
| Type de connexion électrique du circuit principal | Raccordement à vis |
| Type de tension pour l'actionnement | AC |
| Degré de protection (NEMA) | Autre |
| Puissance nominale de fonctionnement NEMA | 5.59 kW |
Détails d’emballage
| Niveau d’emballage 1 | 3389110410884 |
Description
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A reversing inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 3.54 inches wide and 3.39 inches deep. It weighs 1.54 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.