Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Multifunctional push-button unit, 2-fold image 1
Multifunctional push-button unit, 2-fold image 2
Multifunctional push-button unit, 2-fold image 3
Multifunctional push-button unit, 2-fold image 4
Multifunctional push-button unit, 2-fold thumbnail 1
Multifunctional push-button unit, 2-fold thumbnail 2
Multifunctional push-button unit, 2-fold thumbnail 3
Multifunctional push-button unit, 2-fold thumbnail 4

Multifunctional push-button unit, 2-fold

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
81,08 €
Ce prix est valable jusqu’au 24.12.25
EAN: 9010653018575
MPN: EP-500381
Colis: 1
Boîte: 60
Délai de livraison estimé à notre entrepôt (environ): 4-6 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant Multifunctional push-button unit, 2-fold
Marque EATON
Catégories Sensors
Pays d’origine CZ
Code du système harmonisé 8536 5011 00
Méthode de montage Montage en surface (plâtre)
Couleur Gris
Modèle Autre
Protection de surface Non traité
Nombre de canaux 2
Qualité des matériaux Thermoplastique
Système de bus KNX No
Système de bus radio fréquent Yes
Avec connexion de bus Yes
Matériau Plastique
Autres systèmes de bus xComfort
Système de bus LON No
Numéro RAL (similaire) 7035
Transparent No
Finition de la surface Mat
Système de bus KNX radio No
Fréquence radio bidirectionnelle Yes

Détails d’emballage

Niveau d’emballage 1 9010653018575
Niveau d’emballage 2 9010238224216

Description

Multifunctional push-button unit, 2-fold. This multifunctional pushbutton unit has the same design and function as the standard wireless pushbutton, but in addition, it also comes with a temperature and a humidity sensor to measure the climate conditions inside the room. Attention: The temperature and humidity readings are only available for use with xComfort Bridge.The device is powered by a coin cell (CR2450) and can therefore be conveniently attached (screw-mounted or glued) wherever needed. Thanks to the flat design, no installation box or branch-off box is required. The pushbutton is compatible with various 55x55 mm wiring accessories. For the compatibility list, see the “Technical data”. Frames and rockers are available in different colors, finishes and with imprints. The device is powered by a coin cell (CR2450) and can therefore be conveniently attached (screw-mounted or glued) wherever needed. Thanks to the flat design, no installation box or branch-off box is required. The pushbutton is compatible with various 55x55 mm wiring accessories. For the compatibility list, see the “Technical data” chapter on page xx. Frames and rockers are available in different colors, finishes and with imprints.