Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
MULTI9 ID 2P 40A 300MA A-SI TYPE IEC |
| Marque |
Schneider Electric
|
| Catégories |
RCCB - (Residual Current Breakers)
|
| Pays d’origine |
ES |
| Code du système harmonisé |
8536 3030 00
|
| Courant nominal |
40 A |
| Tension nominale |
240 V |
| Tension nominale d'isolation Ui |
440 V |
| Nombre de pôles |
2 |
| Courant de défaut nominal |
300 A |
| Type de courant de fuite |
Autre |
| Protection sélective |
Yes |
| Pouvoir de coupure en court-circuit (Icw) |
10 kA |
| Pouvoir de surtension |
3 kA |
| Déclenchement temporisé à court terme |
Yes |
| Fréquence |
50 Hz |
| Tension nominale de tenue aux chocs Uimp |
6 kV |
Détails d’emballage
| Niveau d’emballage 1 |
3606480578366 |
Autres données techniques
| Méthode de montage |
Rail DIN |
| Profondeur d'encastrement |
44 mm |
| Degré de pollution |
3 |
| Largeur en nombre d'espacements modulaires |
2 |
| Degré de protection (IP) |
IP20 |
| Section du conducteur raccordable à âme pleine |
1-35 mm² |
| Section des conducteurs connectables multi-câblés |
1-25 mm² |
| Avec dispositif de verrouillage |
No |
| Température ambiante pendant le fonctionnement |
-25-40 °C |
| Équipement supplémentaire possible |
No |
Description
This Multi ID product is a residual current circuit breaker (RCCB). It is a 2P circuit breaker with 40A In rated current, 300mA earth leakage sensitivity and A-SI type protection class. This product protects against electrical shock by indirect contact and fire hazards. The tripping upon fault is indicated by a red mechanical status indicator on the front panel. It has increased immunity from electrical interference reducing the risk of nuisance tripping. This product is dedicated to original equipment manufacturers (OEM) and control panel builders in indisutrial and tertiary buildings. It is compliant with IEC/EN 61008-1 standard. The (Im/IΔm) rated breaking and making short circuit capacity is 400A. The (Inc/IΔc) conditional rated short circuit current is 10kA. It has an electrical endurance going up to 2000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 220VAC to 240VAC. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The frequency is 50Hz. It is DIN rail mountable. The width in 9mm pitches is 4. The product colour is light grey (RAL7035). The dimensions are (W) 36mm x (H) 81mm x (D) 73mm. The weight is 0.23kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is from -25°C to 40°C. The storage temperature is from -40°C to 60°C.