Modular surge arrester, Acti9 iPRD1 12.5r, 1 P + N, 350 V, with remote transfert
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Surge arrester Acti9 iPRD1 12.5r 1P+N Type 1+2 20/50kA 350V with remote transfer |
| Marque | Schneider Electric |
| Catégories |
Surge Protection Devices (SPD)
|
| Pays d’origine* | CN |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Niveau de protection de la tension | 1.5 kV |
| Tension continue max. AC | 350 V |
| Tension nominale AC | 230 V |
| Tension nominale DC | 0 V |
| Classe d'essai | Type 1 + 2 |
| Niveau de protection de la tension L-N | 1.5 kV |
| Tension continue maximale DC | 0 V |
| Degré de protection (IP) | IP20 |
| Tension max. Tension PV | 0 V |
| Niveau de protection de la tension N-PE | 1.5 kV |
Détails d’emballage
| Niveau d’emballage 1 | 3606481490209 |
| Niveau d’emballage 2 | 3606481490206 |
| Niveau d’emballage 3 | 3606481490203 |
| Niveau d’emballage 4 | 3606481490209 |
Autres données techniques
| Méthode de montage | Rail DIN (rail chapeau) 35 mm |
| Nombre de pôles | 2 |
| Taille de la construction | 4 espacements modulaires |
| Signalisation à distance | Yes |
| Signalisation sur l'appareil | Optique |
| Fusible de secours intégré | No |
| Section maximale du conducteur solide (solide, toronné) | 35 mm² |
| Section maximale des conducteurs flexibles (brins fins) | 25 mm² |
| Configuration du système DC | No |
| Configuration du système IT | No |
| Configuration du système TN | No |
| Configuration du système TN-C | No |
| Configuration du système TN-S | Yes |
| Configuration du système TT | Yes |
| Configuration du système autre | No |
| Configuration du système TN-C-S | No |
| Dispositif de protection contre les surintensités max., connexion parallèle (fusible) | 0 A |
| Dispositif de protection contre les surintensités, connexion en série (fusible) | 0 A |
| Technologie de commutation de tension par éclateur | No |
Téléchargements
Description
This Acti9 iPRD1 12.5r surge arrester protects 1P+N residential and small commercial buildings installations against direct and indirect transient overvoltages. This type 1+2 device autoprotected by an integrated circuit-breaker is recommanded for high risk level in incoming panel board. It offers remote reporting of the "cartridge must be changed" message. This prewired surge arrester allows quick replacement of withdrawable cartridges when they are damaged. It incorporates its end of life safety disconnector. This Acti9 iPRD1 12.5r is compatible with TT and TN-S earthing systems. Associated with Compact NSXm H TM80D the breaking capacity is 70kA. The Imax maximum discharge current is 50kA. The In nominal discharge current is 20kA. The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC. The Uc maximum continuous operating voltage in common mode is 255VAC between neutral and earth. The Up Voltage protection level is 1.5kV type 1+2. The Ue rated operational voltage is 230VAC. The operating frequency is 50Hz. The dimensions are (W) 36mm x (H) 89mm x (D) 69mm. The width in 9mm pitches is 4. The weight is 290g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to +60°C. The storage temperature is -40°C to +80°C. This product is complies with EN 61643-11 2012 and IEC 61643-11 2011 standards.