Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
MO165-54 Manual Motor Starter Magnetic Only 54 A |
| Marque |
ABB
|
| Catégories |
Disjoncteurs de protection moteur
|
| Code du système harmonisé |
8536 2010 00
|
| Courant permanent nominal Iu |
54 A |
| Nombre de pôles |
3 |
| Tension nominale de fonctionnement |
250-690 V |
| Réglage du courant de déclenchement de la surcharge |
54 A |
| Degré de protection (IP) |
IP20 |
| Pouvoir de coupure nominale en cas de court-circuit lcu à 400 V, AC |
50 kA |
| Plage de réglage du déclenchement non temporisé en cas de court-circuit |
810 A |
Détails d’emballage
| Niveau d’emballage 1 |
4013614486173 |
| Niveau d’emballage 2 |
4013614504037 |
Autres données techniques
| Largeur |
55 mm |
| Hauteur |
142.65 mm |
| Profondeur |
122.1 mm |
| Puissance nominale de fonctionnement à AC-3, 400 V |
22 kW |
| Avec interrupteur auxiliaire intégré |
No |
| Avec déclencheur de sous-tension intégré |
No |
| Avec protection thermique |
No |
| Type de connexion électrique du circuit principal |
Raccordement à vis |
| Type d'élément de commande |
Bouton tournant |
| Technique de coupure |
Magnétique |
| Sensible aux défaillances de phase |
No |
| Construction de l'appareil |
Dispositif complet dans le boîtier |
Téléchargements
Description
The MO165 manual motor starter magnetic only is a compact and powerful range for motor protection up to 45 kW (400 V) in width of 55 mm. The devices are used to manually switch on and off loads/motors and to protect them reliably and without the need for a fuse from short-circuits. The manual motor starter offers a rated service short-circuit breaking capacity up to 100 kA at 400 V AC. A combination together with overload relays or motor controllers allows the protection of motors. Further features are the built-in disconnect function, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starters magnetic only are suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars and power in-feed blocks are available as accessory.