Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
Analogue settable multifunction time relay, 1 NO contact 10A
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
36,22 €
EAN: 4010312603055
MPN: 61100604
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | Analogue settable multifunction time relay, 1 NO contact 10A |
| Marque | ELTAKO |
| Catégories |
Push Buttons and Control
|
| Pays d’origine | CN |
| Code du système harmonisé | 8536 4900 00 |
| Méthode de montage | Montage en surface (plâtre) |
| Fonction | Multifonction |
| Type d'excitation | Analogique avec fonction multiple |
| Largeur en nombre d'espacements modulaires | 0 |
| Nombre d'inverseurs | 0 |
| Type de tension d'alimentation | AC/DC |
| Tension d'alimentation | 8-230 V |
| Unité du 1er intervalle | Minutes/heures |
| 1er intervalle | 1 |
| Capacité de commutation lampes à incandescence | 2000 W |
| Nombre de contacts comme contact normalement fermé | 0 |
| Nombre de contacts comme contact normalement ouvert | 1 |
Détails d’emballage
| Niveau d’emballage 1 | 4010312603055, 4010312603055 |
| Niveau d’emballage 2 | 4010312603055 |
| Niveau d’emballage 3 | 4010312603055 |
Autres données techniques
| Hauteur d'encastrement | 18 mm |
| Tension de contrôle 1 | 8-230 V |
| Type de tension de commande 1 | AC/DC |
| Tension de contrôle de la fréquence 1 | 50 Hz |
| Capacité de commutation lampe fluorescente DUO | 1000 VA |
| Capacité de commutation lampe fluorescente parallèle | 500 VA |
Téléchargements
Description
1 NO contact potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamps 2000W*. Standby loss 0.02–0.4 watt only. Built-in device for installation. 45mm long, 45mm wide, 18mm deep. With the patented Eltako Duplex technology (DX) the normally potential-free contacts can still switch in zero passage when switching 230V AC 50Hz and therefore drastically reduce wear. Simply connect the neutral conductor to the terminal (N) and L to 1(L) for this. This gives an additional standby consumption of only 0.1 watt. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. By using a bistable relay coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. Universal control voltage input 8 to 230V UC. Supply voltage is same as the control voltage. Time settings between 0.5 seconds and 1 hour. Functions F: RV = off delay. AV = operating delay. TI = clock generator starting with impulse. IA = impulse-controlled operating delay. EW = fleeting NO contact. AW = fleeting NC contact. * The maximum load can be used from a delay time or clock cycle of 5 minutes. The maximum load is reduced for shorter times as follows: up to 2 seconds 15%, up to 2 minutes 30%, up to 5 minutes 60%.