Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
MD01 image 1
Merten KNX - Energy meter - 3 x 230 V - 16 A image 2
Merten KNX - Energy meter - 3 x 230 V - 16 A image 3
Merten KNX - Energy meter - 3 x 230 V - 16 A image 4
MD01 thumbnail 1
Merten KNX - Energy meter - 3 x 230 V - 16 A thumbnail 2
Merten KNX - Energy meter - 3 x 230 V - 16 A thumbnail 3
Merten KNX - Energy meter - 3 x 230 V - 16 A thumbnail 4

Merten KNX - Energy meter - 3 x 230 V - 16 A

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
221,878 €
Ce prix est valable jusqu’au 31.12.30
EAN: 3606480512261
MPN: MTN6600-0603
Colis: 1
Boîte: 10
Délai de livraison estimé à notre entrepôt (environ): Sur demande

Technical Information

État de l’article Nouveau
Nom du fabricant Merten KNX - Energy meter - 3 x 230 V - 16 A
Marque Schneider Electric
Catégories Sensors
Pays d’origine DE
Modèle Compteur d'énergie
Type de connexion Direct
Système de bus KNX Yes
Système de bus radio fréquent No
Système de bus Powernet No
Commutateur de tarif Yes
Interface d'impulsion S0 Aucun
Puissance réactive No
Classe de précision 1
Approuvé selon PTB No
Autres systèmes de bus Aucun
Système de bus LON No
Système de bus KNX radio No
Fréquence radio bidirectionnelle No
Profondeur minimale de la boîte d'encastrement 0 mm

Détails d’emballage

Niveau d’emballage 1 3606480512261
Niveau d’emballage 2 3606480512269

Téléchargements

Description

Device for measuring and monitoring energy consumption at up to three channels. Different phases can be connected to the channels. The data is transmitted to the KNX bus for analysis and visualisation. There is a resettable energy counter and a total energy counter for each channel. The device saves the values in the event of a power failure. If one of up to 8 threshold values is exceeded, telegrams for energy-saving and alarm functions can be sent to different loads via the bus. The energy meter can receive energy values measured externally (e.g. from other energy meters or switch actuators with current detection) via the KNX bus and summate them. Suitable for installation on DIN rails TH35 according to EN 60715. With screw terminals. KNX software functions:. Functions per channel: Adjustable energy unit (Wh/kWh). Energy meter (resettable). Total energy meter. Adjustable transmission of power and current values. Energy-saving function: telegrams for saving energy. (switch object, value object, dimming object, scene object and temperature object) are sent when one of up to 8 threshold values is exceeded. 8 separately adjustable threshold values with tolerance (selectable via object). Adjustable tolerances and delays. Alarm function: alarms are sent when current values fall above or below threshold values. Adjustable tolerances and delays. Functions for all channels: Consumption values with time stamp. Time can be received via an external KNX timer. Adjustable nominal voltage (210-240 V). 4 energy counters to count seperatly depending on tariff. Summation of energy values from several channels and external energy values. Status responses regarding bus voltage failure, exceedance of power, total power and tariff meters. Energy measurement: Number of channels: 3. Nominal voltage: AC 220/230 V, 50/60 Hz. Max. current per channel: 16 A. Active energy measurement: Class 1. Detection accuracy: Power and current measurement (calculated): max. 10%. Capacity of total power meter: 2 million kWh. Temperature range: -5°C to + 45°C. IP protection rating: IP 20. Device width: 4 modules, approx. 72 mm. Colour: light grey.