Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
LITECOM KNX Interface S - PC REVOLUTION PI top-hat rails image 1
LITECOM KNX Interface S - PC REVOLUTION PI top-hat rails image 2
LITECOM KNX Interface S - PC REVOLUTION PI top-hat rails thumbnail 1
LITECOM KNX Interface S - PC REVOLUTION PI top-hat rails thumbnail 2
Zumtobel

PC REVOLUTION PI top-hat rails

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
2 294,86 €
Ce prix est valable jusqu’au 24.12.25
EAN: 9010757051485
MPN: 22172349
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): Sur demande

Technical Information

État de l’article Nouveau
Nom du fabricant LITECOM KNX Interface S - PC REVOLUTION PI top-hat rails
Marque Zumtobel
Catégories Bus System Devices (KNX/Modbus)
Pays d’origine AT
Code du système harmonisé 8537 1098 00
Degré de protection (IP) IP20

Détails d’emballage

Niveau d’emballage 1 9010757051485, 9010757051485

Téléchargements

Déclaration DOC CE (Déclaration de conformité CE) Déclaration RoHS Brochure de vente

Description

The LITECOM KNX interface links the data of a maximum of four control devices of a LITECOM installation with the KNX system. The network and the connection to the LITECOM CCD control unit are set on the user interface of the unit. The addressing data of the control device is loaded and the group addresses imported from KNX from the ETS5 configuration (ETS5 or higher) can be linked to a scene in a room or zone. This enables control via the KNX push-button and different control points. Top-hat rail PC in 1.5 module units including KNX interface and implemented software. The connection between the LITECOM installation and the KNX system is provided by the customer. Prerequisite of the function: - A browser-capable device (e.g. a computer) is available to display the web application. - Power supply 24 V DC is available (type: 22161814, not included). - LITECOM KNX interface and all LITECOM CCD control devices to be linked, as well as the KNX IP router and the displaying device (e.g. computer) are connected via an Ethernet cable and are in the same network. - Consumer name and API token of the LITECOM CCD control unit are available. - KNX-ETS5 (or higher) configuration is available. - The software version of LITECOM must be updated to version 3.0.0 or higher. - KNX operating devices were put into operation. - Exports of the required KNX group addresses are available. - KNX IP router: IP address is in the correct network and the IP address is known.