LED strip 2835, DC24V, 300LED/5m, 12 W/m, 780 lm/m, 3200K, IP20, roll 5 m

The current trend is to move away from light points in favor of linear lighting, which is based on LED strips.

LED strips are popular due to their low price and proven quality. Of course, their reliability largely depends on carefully carried out assembly.

During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center.

LED strips find a wide range of applications both in homes and office spaces. You can use them to illuminate the kitchen, dressing room, reception, showcases and even walls and ceilings.

LED strip 2835 with its entire length, i.e. 5 m, consumes 48 W, while 1 meter consumes only 12 W. The tape can be cut every 10 cm, remembering that the cut should be made in a specially marked place. Tapes powered by 24 V are characterized by smaller drops in brightness over long distances. 

An important parameter of LED strips is the density of the arrangement of diodes. The more densely they are arranged, the more even the line of light we get. In this case, 300 diodes are arranged along the entire length of the tape, i.e. 60 / m.

You should also pay attention to the width of the LED strip to be able to paste it into the profile without any problems. This index is 8 mm wide.

• Longer tape life and greater installation security;
• less system loading light drops at long sections of tape;
• 24V DC;
• 780 lm/m;
• 6500 K;
• lenght: 5 m.