Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
LED drivers
Commande uniquement
Prix (hors TVA):
50,32 €
EAN: 9006210800981
MPN: 87501058
Colis: 1
Délai de livraison estimé à notre entrepôt: 2-4 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | LED drivers |
| Marque | Tridonic |
| Catégories |
Transformateur led
|
| Largeur | 77 mm |
| Hauteur | 31 mm |
| Longueur de la prise | 133 mm |
| Tension de sortie | 0 V |
| Puissance de sortie | 30.1-60 W |
| Degré de protection (IP) | IP20 |
| Courant de sortie | 700-1500 mA |
| Pas de fonction de gradation | No |
Détails d’emballage
| Niveau d’emballage 1 | 9006210800981, 9006210800981, 9006210800981 |
Autres données techniques
| Adapté à l'utilisation en extérieur | Yes |
| Adapté à la tension continue (côté primaire) | Yes |
| Gradation 0-10 V | No |
| Gradation 1-10 V | No |
| Gradation DALI | Yes |
| Gradation DMX | No |
| Potentiomètre de gradation (intégré) | No |
| Gradation GPRS | No |
| Dimming LineSwitch | No |
| Système de gradation propre au fabricant | Yes |
| Dimming modulation de la tension secteur | No |
| Coupure de la phase de gradation | No |
| Phase de coupure de la gradation | No |
| Gradation programmable | No |
| Gradation RF | No |
| Dimming Sine Wave Reduction (réduction de l'onde sinusoïdale) | No |
| Dimming Touch and Dim | No |
| Gradation Zigbee | No |
| Gradation par bouton-poussoir | No |
| Gradation DSI | Yes |
Description
Dimmable built-in constant current outdoor LED driver ¦ Dimming range 5 to 100 % ¦ For luminaires of protection class I and protection class II ¦ Temperature protection as per EN 61347-2-13 C5e ¦ Output current adjustable between 700 – 1,500 mA via NFC or DALI ¦ Max. output power 60 W ¦ Up to 90 % efficiency ¦ Lowest power input on stand-by < 0.16 W ¦ Nominal lifetime of 100,000 h and 8 years guarantee (conditions at www.tridonic.com) ¦ Near field communication (NFC) ¦ one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ¦ U6Me2 (configuration of chronoSTEP via mains) ¦ Terminal blocks: 45° / 0° push terminals ¦ Adjustable output current in 1-mA-steps (NFC, DALI) ¦ Programmable chronoSTEP: times and levels (NFC, DALI, U6Me2) ¦ Dimming through mains voltage (inputDIM) ¦ Enhanced constant light output function (eCLO) ¦ Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) ¦ Configurable external temperature management (ETM) ¦ Intelligent Temperature Guard (ITG) ¦ Intelligent Voltage Guard Plus (IVG+) ¦ Suitable for emergency escape lighting systems acc. to EN 50172 ¦ Flexible configuration via companionSUITE (NFC, DALI) or U6Me2 programmer ¦ Application-oriented operating window for maximum compatibility ¦ Best energy savings due to low stand-by losses and high efficiency ¦ In-field programming possible after installation with NFC interface and ready2mains ¦ High overvoltage protection: up to 10 kV asymmetric (protection class I and II) ¦ Road, street and industry