Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
***KNX Sw.Act. 2x6A w.2 i ts FM image 1

Interrupteur actionneur KNX W.2, 6 A, 230 V, IP20

Commande uniquement
EAN: 3606480423970
MPN: MTN6003-0002
Colis: 1
Boîte: 40
Prix (hors TVA)
588,83 €
par unité
Quantité minimale de commande: 1
Délai de livraison estimé à notre entrepôt: 4-6 weeks
Ce prix est valable jusqu’à la prochaine liste de prix ou jusqu’à épuisement des stocks

Informations techniques

État de l’article Nouveau
Nom du fabricant ***KNX Sw.Act. 2x6A w.2 i ts FM
Marque Schneider Electric
Catégories Appareils bus KNX & Modbus
Pays d’origine* DE
* Le pays d'origine réel peut varier selon le lot de livraison. Pour confirmer le pays d'origine spécifique, veuillez contacter votre gestionnaire de compte.
ETIM EC001097
Système de bus KNX Oui
Avec connexion de bus Oui
Système de bus LON Non
Système de bus KNX radio Non
Fréquence radio bidirectionnelle Non

Détails d’emballage

Niveau d’emballage 1 3606480423970
Niveau d’emballage 2 3606480423978

Autres données techniques

Méthode de montage Montage encastré (plâtre)
Courant nominal 6 A
Puissance de sortie 1200 W
Tension nominale de fonctionnement 230 V
Système de bus radio fréquent Non
Système de bus Powernet Non
Puissance de commutation max. 1200 W
Nombre max. de contacts de commutation 2
Nombre d'entrées numériques 0
Largeur en nombre d'espacements modulaires 0
Courant de commutation max. 6 A
Adapté à la charge C Non
Possibilité de connecter différentes phases Non
Opération locale/opération manuelle Non
Degré de protection (IP) IP20
Avec indication LED Non
Possibilité d'extension modulaire Non
Module de bus détachable Non
Profondeur minimale de la boîte d'encastrement 0 mm
Puissance de commutation max. 0 W

Description

KNX 2-gang switch actuator with two inputs for installation in a size 60 switch box. Floating contacts can be connected to the two inputs. The inputs have already been assigned to the corresponding actuators at the factory, enabling operation without programming. Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m. KNX software functions: Switch actuator functions: Operation as break contact or make contact. Selection of default position on bus voltage failure/recovery. Switch on and/or off delay. Time switch function. Switching. Status feedback. Logic operation. Disable function or priority control. Status feedback object can be inverted. Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. Blinds: Command on rising edge (none, UP, DOWN, TOGGLE). Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function. Nominal voltage: AC 230 V. Nominal current: 6 A, ohmic load. Switch contacts: 2x make contacts. Nominal output. Incandescent lamps: AC 230 V, max. 1200 W. Halogen lamps: AC 230 V, max. 1200 W. LV halogen lamps: max. 500 VA, wound transformer. max. 500 W, electronic transformers. Capacitive load: AC 230 V, 6 A, max. 14 µF. Inputs: 2. Temperature range: -5 °C to 45 °C. Type of protection: IP 20. Dimensions: 53x53x28 (WxHxD).