bus coup.btn 1-g ctrl.win. + 2-point KNX WP SM grey

Bus coupler button WP SM, 1-gang with control window and two-point operation for KNX grey The bus coupler button is the interface between the KNX system and the user. Features: Button function: Switching, dimming, blind, value transmitter 1-byte, and scene auxiliary unit. Switching function: Command for pressing and releasing the buttons can be parameterised (ON, OFF, CHANGE, no reaction). Dimming function: Command for pressing the buttons can be parameterised (Brighter-ON, Darker-OFF, Brighter or Darker-CHANGE, Brighter-CHANGE, Darker-CHANGE, no reaction). Blind function: Command for pressing the buttons can be parameterised (UP, DOWN, no reaction). Value transmitter 1-byte function: Mode of operation can be configured. Scene auxiliary unit function: Mode of operation can be configured (with or without block function for pressing and holding a button). The rocker can be operated on both sides (e.g. top bottom) during two-point operation (upright rocker). Bus coupler button in the water-protected surface-mounted system (IP44). Functions of the status LED: Red LED can either be used as an orientation light, actuation display, or status display. The rocker or button function operating concepts can be set. Rocker function: Switching, dimming, and blind. Command for top and bottom rocker actuation can be parameterised (ON, OFF, CHANGE, no reaction). Command for top and bottom rocker actuation can be parameterised (Brighter-ON, Darker-OFF, Bright darker-CHANGE, Brighter-CHANGE, Darker-CHANGE, no reaction). Command for rocker actuation can be parameterised (rocker top: UP rocker bottom: DOWN, rocker top: DOWN rocker bottom: UP).