interface XLI300 Vigilohm - 220...240 V AC 50/60 Hz
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
2 646,38 €
Ce prix est valable jusqu’au 24.12.25
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
interface XLI300 Vigilohm - 220...240 V AC 50/60 Hz |
Marque |
Schneider Electric
|
Catégories |
Monitoring Relays
|
Fonction |
Pour système à courant alternatif |
Indication de la valeur d'isolation |
No |
Enregistrement d'erreurs possible |
No |
Valeur de réponse impédance 1 |
0 kOhm |
Valeur de réponse impédance 2 |
0 kOhm |
Nombre de contacts comme contact normalement fermé |
0 |
Détails d’emballage
Niveau d’emballage 1 |
3303430505167 |
Niveau d’emballage 2 |
3303430505165 |
Autres données techniques
Largeur |
76 mm |
Hauteur |
129 mm |
Profondeur |
209.5 mm |
Fréquence nominale |
0 Hz |
Capacité de la ligne |
0 µF |
Type de connexion électrique |
Raccordement à vis |
Tension nominale |
0 V |
Tension nominale d'alimentation de commande Us à AC 50HZ |
220-240 V |
Tension nominale d'alimentation Us à AC 60HZ |
220-240 V |
Tension nominale d'alimentation de commande Us à DC |
0 V |
Nombre de contacts comme contact normalement ouvert |
0 |
Nombre de contacts comme contact inverseur |
0 |
Téléchargements
Description
This device belongs to the Vigilohm range designed to monitor ungrounded/IT electrical networks, in accordance to installation and products standards. When two or more communicating devices (XM300C, XML308/316, XL308/316 or XD308C) are used. Or when communication with a supervisor is required, it is necessary to connect one interface to the communication bus. The interface allows communication between the Vigilohm System and a supervisor or PLC using a Modbus type protocol. It transmits the information provided by the Vigilohm System, measurement, settings, faults, alarms and identified circuit. This communication module is compatible with monitoring device XM300C, locator XL308/316, combined device XML308/316 and detector XD308C. 2 LED indicate the power status and communication. The interface is able to exclude the injection from monitoring device to avoid any perturbation inside a small network. The device can be supplied by a 220V AC to 240V AC source with a tolérence of plus 10% or minus 15%. This product is installed flush mounted, an enclosure door for example. ingress protection is IP30 when flush mounted.