Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
INST wind sen. w.0-10V interf.+heat.pw image 1
INST wind sen. w.0-10V interf.+heat.pw image 2
INST wind sen. w.0-10V interf.+heat.pw thumbnail 1
INST wind sen. w.0-10V interf.+heat.pw thumbnail 2

INST WIND SEN. W.0-10V INTERF.+HEAT.PW

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
453,73 €
Ce prix est valable jusqu’au 24.12.25
EAN: 4011281853106
MPN: 663592
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 4-6 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant INST wind sen. w.0-10V interf.+heat.pw
Marque Merten by Schneider Electric
Catégories Sensors
Pays d’origine DE
Code du système harmonisé 8531 1030 00
Méthode de montage Montage en surface (plâtre)
Couleur blanc
Modèle Capteur de vent
Système de bus KNX No
Système de bus radio fréquent No
Système de bus Powernet No
Avec connexion de bus No
Avec chauffage Yes
Nombre d'entrées numériques 0
Entrée analogique No
Autres systèmes de bus Aucun
Système de bus LON No
Numéro RAL (similaire) 9010
Station météo No
Degré de protection (IP) IP65
Avec DCF77 No
Signal acoustique No
Système de bus KNX radio No
Fréquence radio bidirectionnelle No

Détails d’emballage

Niveau d’emballage 1 4011281853106

Description

Wind sensor with 0-10 V interface and heating. The wind sensor evaluates the wind speed and converts it into an analogue 0-10 V output voltage. The integrated heater can be operated via an external power supply of AC 24 V/500 mA for trouble-free operation in frosty weather. For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor. Measuring range: 0.7-40 m/s, linear. Output: 0-10 V. External power supply: Voltage: 24 V DC (18-32 V DC). Power consumption: approx. 12 mA. Heating: 24 V DC/AC PTC element (80° C). Type of protection: IP 65. Load: max. 60 m/s transient. Incoming cable: 3 m, LiYY 6 x 0.25 mm². Fixing method: Mounting bracket. Mounting position: vertical. Contents: With mounting bracket. Colour: polar white.