Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
Built-in room thermostat for PHCtechn. For details, see catalogue |
| Marque |
Peha by Honeywell
|
| Catégories |
Bus System Devices (KNX/Modbus)
|
| Pays d’origine* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Code du système harmonisé |
9032 1080 00
|
| Disposition de l'assemblage |
Élément de base |
| Système de bus KNX |
No |
| Système de bus radio fréquent |
No |
| Système de bus Powernet |
No |
| Avec connexion de bus |
No |
| Autres systèmes de bus |
PHC |
| Système de bus LON |
No |
Détails d’emballage
| Niveau d’emballage 1 |
4010105926095 |
Autres données techniques
| Méthode de montage |
Montage encastré (plâtre) |
| Couleur |
Autre |
| Protection de surface |
Non traité |
| Avec écran |
No |
| Qualité des matériaux |
Thermoplastique |
| Matériau |
Plastique |
| Avec protection antivol/démontage |
No |
| Réglage manuel du point de consigne |
Yes |
| Service parallèle possible |
No |
| Bouton de présence |
No |
| Degré de protection (IP) |
IP20 |
| Avec indication LED |
Yes |
| Avec opération locale |
Yes |
Téléchargements
Description
PHC-inbouw-ruimtethermostaat Inbouw-centraalplaat voor combinaties, aan te sluiten op een ingangsmoduul 941/24 EM, 940/10 AM of 940/24 AM, aansluitbekabeling min. JY(ST)Y 2 x 2 x 0,8 mm2 STANDARD Technische gegevens: Netspanning: 24 V DC, DIALOG van het PHC-system Stroomverbruik: ca. 30 mA (Let op voor stroomberekening) AURA Nominale stroom: Verwarmen: 1 A Koelen: 1 A Schakelvermogen:Verwarmen: 24 W Koelen: 24 W Temperatuurbereik: 5 tot 30 °C Schakeldifferentie: ca. 0,5 K Nachtverlaging: ca. 4 K Beschermingsklasse: IP 30 LED: toont nachtverlaging aktief/niet aktief Keuzeschakelaar: "kloksymbool" = nachtverlaging wordt via het PHC-systeem geprogrammeert "Zonsymbool" = normaalbedrijf (Nachtverlaging niet aktief) "Maansymbool" = nachtverlaging permanent aktief In "Klokbedrijf" (PHC) wordt de nachtverlaging middels de geschakelde 0 V van uitgangsmoduul 940/10 AM, 940/24 AM geaktiveerd. Belangrijk: Het ruimtethermostaat, de ingangsmoduul en het uitgangsmoduul moeten via dezelfde stroomverzorging 940 SPV aangesloten worden.