| État de l’article | Nouveau |
| Nom du fabricant | Heating Mat 2210W 0.5С…26.0m 8.9A 230V |
| Marque | THORGEON |
| Catégories |
Underfloor Heating Systems
|
| Pays d’origine* | LV |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Code du système harmonisé | 8516 8080 00 |
| Modèle | Câble chauffant |
| Puissance | 170 W/m² |
| Epaisseur | 3.8 mm |
| Autocollant | No |
| Surface | 13 m² |
| Avec tapis de support | Yes |
| Résistance | 26 Ohm |
| Avec régulateur | No |
| Charge connectée | 2210 W |
| Tension de raccordement | 230 V |
| Convient comme chauffage de surface extérieur | Yes |
| Adapté aux locaux humides | Yes |
| Niveau d’emballage 1 | 4752280006840 |
Stranded heating conductors made of CuNi, CuCr, NiCr alloys depending on the resistance. Internal insulation made of heat-resistant extruded FEP. Aluminum foil screen. Drain conductor made of stranded Al-Mg wires. External insulation made of PVC-modified polyvinyl chloride with increased heat resistance. Synthetic fiberglass mesh 50cm wide. Cold lead 3.0m long (PVC 3×1.0mm2).
The thickness of the heating cable is only 3.6 mm, which allows to use the minimum thickness of the tile adhesive. The heating cable is securely sewn to an ultra-thin and durable synthetic mesh with a thickness of only 0.2 mm, which does not deform when laid out.
| Maximum operating temperature: | +90⁰С |
| Minimum installation temperature: | -10⁰С |
| Cable outer diameter: | 3.6 mm |
| Mat thickness | 3.8 mm |
| Installation wire feeding the heating cable: | 3.0m, PVC 3x1.0mm² |
| Color of connected wires: | brown - phase (L), blue - zero (N), yellow-green - "ground" (PE) |