Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
RS485 bus weather data gateway for multi sensor MS
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
51,25 €
EAN: 4010312316887
MPN: 30014072
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
2-4 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | RS485 bus weather data gateway for multi sensor MS |
| Marque | ELTAKO |
| Catégories |
Bus System Devices (KNX/Modbus)
|
| Pays d’origine | CN |
| Code du système harmonisé | 8526 9200 00 |
| Méthode de montage | DRA (adaptateur pour rail DIN) |
| Modèle | Interface multiple |
| Système de bus KNX | No |
| Système de bus Powernet | No |
| Largeur en nombre d'espacements modulaires | 1 |
| Autres systèmes de bus | Autre |
Détails d’emballage
| Niveau d’emballage 1 | 4010312316887, 4010312316887 |
| Niveau d’emballage 2 | 4010312316887 |
| Niveau d’emballage 3 | 4010312316887 |
Autres données techniques
| Type de tension | DC |
| Consommation électrique | 0.3 W |
| Système de bus radio fréquent | Yes |
| Système de bus LON | No |
| Protection contre le démontage | No |
| Interface radio | No |
| Interface IR | No |
| Protocole | Autre |
| Dépendant du fournisseur | No |
| Possibilité de mise à jour | No |
| Visualisation | No |
| Serveur web | No |
| Tension de fonctionnement | 5 V |
| Degré de protection (IP) | IP20 |
| Avec indication LED | No |
| Système de bus KNX radio | No |
| Fréquence radio bidirectionnelle | No |
Téléchargements
Description
Weather data gateway for multi sensor MS. Bidirectional. Only 0.3 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. A multisensor MS at the gateway is connected to terminals RSA and RSB. The information is received once per second and converted into bus telegrams. However, several FWG14MS can be connected to a multisensor MS e.g. to control several Eltako RS485 buses with only one MS multisensor. Only at one FWG14MS must the end resistor connected. At additional FWG14MS, this resistor must be removed. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. The Hold terminal is connected to the FAM14 or the FTS14KS. A maximum of two FWG14MS devices can be operated in one bus. The telegram duplicator FTD14 can also send telegrams over the Wireless Building System after the IDs of the FGW14MS are taught in the FTD14 or entered using the PTC14. Receiving devices can then be FSB14, FSB61NP and FSB71. If the multisensor MS signal is not received, an alarm telegram is sent. Using the PC Tool PCT14, 96 inputs can be AND or OR linked and up to 12 outputs can be output. The BA operating mode rotary switch can be configured according to the operating instructions.