Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
RS485 bus telegram duplicator
Commande uniquement
Prix (hors TVA):
76,79 €
EAN: 4010312315705
MPN: 30014057
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
2-4 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | RS485 bus telegram duplicator |
| Marque | ELTAKO |
| Catégories |
Bus System Devices (KNX/Modbus)
|
| Pays d’origine* | CN |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Code du système harmonisé | 8526 9200 00 |
| Méthode de montage | DRA (adaptateur pour rail DIN) |
| Nombre d'entrées | 60 |
| Nombre de sorties | 60 |
| Système de bus KNX | No |
| Avec connexion de bus | Yes |
| Largeur en nombre d'espacements modulaires | 1 |
| Autres systèmes de bus | Autre |
Détails d’emballage
| Niveau d’emballage 1 | 4010312315705, 4010312315705 |
| Niveau d’emballage 2 | 4010312315705 |
| Niveau d’emballage 3 | 4010312315705 |
Autres données techniques
| Système de bus radio fréquent | Yes |
| Système de bus Powernet | No |
| Système de bus LON | No |
| Opération locale/opération manuelle | No |
| Degré de protection (IP) | IP20 |
| Système de bus KNX radio | No |
Téléchargements
Description
Telegram duplicator for the Eltako RS485 bus with exchangeable antenna. Only 0.5 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. The telegrams of taught-in IDs are duplicated and directly sent into the Eltako wireless network with a new output ID. These wireless telegrams can be specifically taught-in in decentralized actuators. A total of 120 memory locations are available. The upper rotary switch is used to selectively transmitting a wireless telegram. In normal operation, it is set to RUN. The bottom rotary switch is used for teaching-in and deleting IDs. In normal operation, it is set to RUN. The red LED below the upper rotary switch performs during the teaching-in process. The green LED below the lower rotary switch lights up briefly when a wireless telegram is transmitted. The enclosed small antenna can be replaced with a wireless antenna FAG55E- or FA250 with magnetic base and cable.