Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
1- and 2-level wireless repeater image 1
ELTAKO

1- and 2-level wireless repeater

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
52,82 €
Ce prix est valable jusqu’au 31.12.25
EAN: 4010312320310
MPN: 30000534
Colis: 1
Délai de livraison estimé à notre entrepôt (environ): 2-4 weeks

Technical Information

État de l’article Nouveau
Nom du fabricant 1- and 2-level wireless repeater
Marque ELTAKO
Catégories Bus System Devices (KNX/Modbus)
Pays d’origine CN
Code du système harmonisé 8526 9200 00
Tension nominale 230 V
Méthode de montage Montage encastré (plâtre)
Système de bus KNX No
Système de bus Powernet No
Autres systèmes de bus Aucun
Système de bus LON No

Détails d’emballage

Niveau d’emballage 1 4010312320310, 4010312320310
Niveau d’emballage 2 4010312320310
Niveau d’emballage 3 4010312320310

Autres données techniques

Système de bus radio fréquent Yes
Degré de protection (IP) IP20
Système de bus KNX radio No
Profondeur minimale de la boîte d'encastrement 22 mm

Téléchargements

Lien profond vers la page du produit

Description

1 and 2 level wireless repeaters. Only 0.7 watt standby loss. For installation. 49x51mm wide, 20mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. If the supply voltage is only connected to terminals L and N, Level 1 mode is active. Only wireless signals from sensors are received, tested and forwarded at full transmit power. If phase is connected to the Level 2 terminal in addition to the supply voltage, Level 2 mode is active. In addition to wireless signals from sensors, the wireless signals of Level 1 repeaters are processed. A wireless signal can then be received and amplified a maximum of two times. Wireless repeaters need not be taught in. They receive and amplify signals from all wireless sensors within their reception area.