Inscrivez-vous pour débloquer vos prix B2B exclusifs et commencez vos achats. Inscrivez-vous maintenant!
1- and 2-level wireless repeater
En stock: Non
Stock fournisseur: Non
Quantité minimale de commande: 1
Prix (hors TVA):
55,05 €
EAN: 4010312300251
MPN: 30000350
Colis: 1
Délai de livraison estimé à notre entrepôt (environ):
4-6 weeks
Technical Information
| État de l’article | Nouveau |
| Nom du fabricant | 1- and 2-level wireless repeater |
| Marque | ELTAKO |
| Catégories |
Sensors
|
| Pays d’origine | CN |
| Code du système harmonisé | 8526 9200 00 |
| Tension nominale | 230 V |
| Méthode de montage | Montage encastré (plâtre) |
| Système de bus KNX | No |
| Système de bus radio fréquent | Yes |
| Système de bus Powernet | No |
| Autres systèmes de bus | Aucun |
| Système de bus LON | No |
| Degré de protection (IP) | IP20 |
| Système de bus KNX radio | No |
| Profondeur minimale de la boîte d'encastrement | 33 mm |
Détails d’emballage
| Niveau d’emballage 1 | 4010312300251, 4010312300251 |
| Niveau d’emballage 2 | 4010312300251 |
| Niveau d’emballage 3 | 4010312300251 |
Téléchargements
Description
1 and 2 level wireless repeaters. Only 0.7 watt standby loss. For installation. 45mm long, 45mm wide, 33mm deep. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only wireless signals from sensors are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Use the rotary switch to switch over to 2 level mode. Then the wireless signals from sensors and from another 1 level repeater are processed. A signal may therefore be received and amplified twice. The LED indicates incoming wireless signals by flashing briefly. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area.