Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
Front connector module for SIMATIC S7-1500, ana. IOs, 50-p. cable connect. |
| Marque |
Siemens
|
| Catégories |
Terminal Block Accessories
|
| Pays d’origine |
RO |
| Code du système harmonisé |
8536 6990 00
|
| Tension nominale |
24 V |
| Distance de perçage au centre |
0 mm |
| Courant nominal In |
0 A |
| Version antidéflagrante "Ex e |
No |
Détails d’emballage
| Niveau d’emballage 1 |
4047623602507 |
Autres données techniques
| Méthode de montage |
Montage direct |
| Couleur |
Noir |
| Largeur |
0 mm |
| Sans halogène |
No |
| Hauteur |
0 mm |
| Profondeur |
0 mm |
| Nombre de pôles |
40 |
| Température de fonctionnement |
0-60 °C |
| Nombre de positions de serrage par pôle |
0 |
| Plaque de fermeture nécessaire |
No |
| Type de connexion électrique 1 |
Connexion enfichable |
| Transparent |
No |
| Matériau corps isolant |
Autre |
Description
Front connector module with 1x50 pole IDC connector for analog 40 pole I/O modules of the S7-1500 Potential supply over Infeed element The front connector module for SIMATIC S7-1500 for potential feed to connect 50-pole cables represents a modified front connector for connection to an analog I/O module. This is plugged into the module to be wired instead of the front connector. Here the cables are plugged in and connected to the connection module.This modified front connector module is part of the fully modular connection of SIMATIC TOP connect for the fastest and safest system cabling. In addition to low wiring costs, error sources in cabling can be significantly reduced. Sensors and actuators from the peripherals are attached to the connection modules of SIMATIC TOP connect and linked to the SIMATIC S7-300 via connecting cable and front plug-in module.