Technical Information
| État de l’article |
Nouveau |
| Nom du fabricant |
Wireless Powerline tunnel gateway |
| Marque |
ELTAKO
|
| Catégories |
Bus System Devices (KNX/Modbus)
|
| Pays d’origine |
CN |
| Code du système harmonisé |
8526 9200 00
|
| Méthode de montage |
DRA (adaptateur pour rail DIN) |
| Modèle |
Interface radio spécifique au fabricant |
| Système de bus KNX |
No |
| Système de bus Powernet |
Yes |
| Largeur en nombre d'espacements modulaires |
2 |
| Autres systèmes de bus |
Aucun |
Détails d’emballage
| Niveau d’emballage 1 |
4010312317723, 4010312317723 |
| Niveau d’emballage 2 |
4010312317723 |
| Niveau d’emballage 3 |
4010312317723 |
Autres données techniques
| Type de tension |
DC |
| Consommation électrique |
0.4 W |
| Système de bus radio fréquent |
Yes |
| Système de bus LON |
No |
| Protection contre le démontage |
No |
| Interface radio |
Yes |
| Interface IR |
No |
| Protocole |
Autre |
| Dépendant du fournisseur |
No |
| Possibilité de mise à jour |
No |
| Visualisation |
Yes |
| Serveur web |
No |
| Tension de fonctionnement |
12 V |
| Avec indication LED |
Yes |
| Système de bus KNX radio |
No |
| Fréquence radio bidirectionnelle |
Yes |
Téléchargements
Description
Wireless Powerline tunnel gateway. Uni- and bidirectional. Standby loss only 0.4 watt. Modular device for DIN-EN 60715 TH35 rail mounting. 2 module = 36mm wide, 58mm deep. Supply voltage 230V. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. This gateway transmits RS485 bus telegrams over powerline with large distance over the electrical net. Minimum 2 pcs FPLT14 are required. Up to 10 FPLT14 can unidirectionally send the bus telegrams of their FAM14 / FTS14KS installation with Powerline to another FAM14/FTS14KS installation via a local FPLT14. Teach-in up to 120 telegram IDs according to the operating instructions, also with PCT14. Two FPLT14 can exchange the bus telegrams bidirectionally from 2 FAM14/FTS14KS installations with Powerline via the installed wires. Teach-in up to 120 telegram IDs according to the operating instructions, also with PCT14. Because of the transmission delay, short-click evaluations for FUD and FSB actuators are not possible.